Difference between revisions of "16725/P0341/000833"

From Ross-Tech Wiki
 
Line 24: Line 24:
 
* When found in 2008 and newer VW 2.0T engine with a timing chain (example; CCTA and CBFA), please see:
 
* When found in 2008 and newer VW 2.0T engine with a timing chain (example; CCTA and CBFA), please see:
 
** TT 01-15-08 for information about the intake camshaft, adjuster bridge and spool valve.
 
** TT 01-15-08 for information about the intake camshaft, adjuster bridge and spool valve.
 +
*** https://static.nhtsa.gov/odi/tsbs/2020/MC-10174989-0001.pdf  NHTSA
 
** Also see [http://forums.ross-tech.com/showthread.php?4812-Audi-Volkswagen-2-0L-Chain-Drive-P0016-Cam-Crank-correlation-check this thread if found in conjunction with P0016]
 
** Also see [http://forums.ross-tech.com/showthread.php?4812-Audi-Volkswagen-2-0L-Chain-Drive-P0016-Cam-Crank-correlation-check this thread if found in conjunction with P0016]
 
* '''When found in a 2.7T''' (or similar V6/V8 engine) make sure the flex-plate (i.e. drive plate) is installed correctly after engine repairs.  The 2.7T BEL will allow you to bolt the flex-plate on incorrectly resulting in [[16730/P0346]] and [[16725/P0341/000833]].
 
* '''When found in a 2.7T''' (or similar V6/V8 engine) make sure the flex-plate (i.e. drive plate) is installed correctly after engine repairs.  The 2.7T BEL will allow you to bolt the flex-plate on incorrectly resulting in [[16730/P0346]] and [[16725/P0341/000833]].

Latest revision as of 14:54, 7 April 2021

16725/P0341/000833 - Camshaft Position Sensor (G40): Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) active

Possible Causes

  • Wiring from/to Camshaft Position Sensor (G40) faulty
  • Camshaft Position Sensor (G40) faulty
  • Timing misaligned
  • Low level oil or low oil pressure

Possible Solutions

  • Check Wiring from/to Camshaft Position Sensor (G40)
  • Check Camshaft Position Sensor (G40)
  • Check Timing
  • Check Oil level and/or Oil pressure

Special Notes