Difference between revisions of "16785/P0401/001025"

From Ross-Tech Wiki
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
−
== 16785/P0401 - Exhaust Gas Recirculation Flow Insufficient Detected ==
+
== 16785/P0401/001025 - Exhaust Gas Recirculation (EGR) System: Insufficient Flow Detected ==
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
−
* Drivebility problems (check dtc's with Knock Sensor)
+
* Malfunction Indicator Light (MIL) ON
−
* Irregular behaviour
+
* Reduced Exhaust Gas Recirculation (EGR)
 +
* Reduced Power Output/Engine running rough
 +
* Increased Emissions
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
−
* EGR valve stuck closed
+
* Exhaust Gas Recirculation (EGR) Flow restricted/clogged
−
* EGR valve leaks vacuum
+
* Exhaust Gas Recirculation (EGR) Valve stuck closed/leaking/faulty
−
* EGR flow restricted
+
* Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve faulty
−
* Circuit EGR short to B+
+
* Exhaust Gas Recirculation (EGR) System faulty
−
* EGR damaged
 
−
* Circuit DPF EGR sensor (differential pressure) disconnected, short to B+ or Ground
 
−
* DPF EGR sensor downstream hose off or plugded
 
−
* DPF EGR sensor damaged, wrong attached
 
−
* Control Module damaged
 
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
−
* Check all wiring and connections to and from EGR and DPF-EGR
+
* Check/Clean Exhaust Gas Recirculation (EGR) System
−
* Check the EGR: use a vacuumpump and pull open the EGR: rpm should change
+
* Check/Replace Exhaust Gas Recirculation (EGR) Valve
−
* Clean the EGR
+
* Check Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve
−
* Check / Replace EGR
 
−
* Check / Replace DPF-EGR
 
−
 
 
−
==== Special Notes ====
 
−
 
 
−
* The EGR system is monitored when driving at steady state and the EGR is commanded on. When the DPF-EGR sensor indicates that EGR flow is less then a desired minimum a dtc is set.
 
−
* N.B. mechanics with less knowledge do exchange the EGR often, but 75% sure the problem will be back (probably the DPF-EGR sensor causes the problem).
 
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 09:20, 6 April 2009

16785/P0401/001025 - Exhaust Gas Recirculation (EGR) System: Insufficient Flow Detected

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Reduced Exhaust Gas Recirculation (EGR)
  • Reduced Power Output/Engine running rough
  • Increased Emissions

Possible Causes

  • Exhaust Gas Recirculation (EGR) Flow restricted/clogged
  • Exhaust Gas Recirculation (EGR) Valve stuck closed/leaking/faulty
  • Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve faulty
  • Exhaust Gas Recirculation (EGR) System faulty

Possible Solutions

  • Check/Clean Exhaust Gas Recirculation (EGR) System
  • Check/Replace Exhaust Gas Recirculation (EGR) Valve
  • Check Wiring and/or Connector(s) from/to Exhaust Gas Recirculation (EGR) Valve
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=16785/P0401/001025&oldid=4712"