Difference between revisions of "17036/P0652/001618"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 18: | Line 18: | ||
* When found in 1.9l TDI (BEW): | * When found in 1.9l TDI (BEW): | ||
** Check Atmospheric Pressure (MVB 010.2) and Intake Manifold Pressure Sensor (MVB 010.3). Compare both Values with Engine OFF, the Tolerance should be +/- 50 mbar. | ** Check Atmospheric Pressure (MVB 010.2) and Intake Manifold Pressure Sensor (MVB 010.3). Compare both Values with Engine OFF, the Tolerance should be +/- 50 mbar. | ||
| − | ** Check Variable Nozzle Turbocharger (VNT) | + | ** Check Variable Nozzle Turbocharger (VNT). Specifically, check the electronic actuator position sensor G500 , including unplugging it for testing. |
| + | * When found in other engines: | ||
| + | ** Check the factory repair manual since this fault can point to problems with several different sensors. | ||
| + | ** Specifically in the BLB engine, faulty MAF wiring can trigger it. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 10:43, 13 March 2014
17036/P0652/001618 - Sensor Reference Voltage B: Too Low
Possible Causes
- Wiring/Connectors from/to Intake Manifold Pressure Sensor (G31) faulty
- Intake Manifold Pressure Sensor (G31) faulty
- Engine Control Module faulty
Possible Solutions
- Check Wiring/Connectors from/to Intake Manifold Pressure Sensor (G31)
- Check/Replace Intake Manifold Pressure Sensor (G31)
- Replace Engine Control Module
Special Notes
- When found in 1.9l TDI (BEW):
- Check Atmospheric Pressure (MVB 010.2) and Intake Manifold Pressure Sensor (MVB 010.3). Compare both Values with Engine OFF, the Tolerance should be +/- 50 mbar.
- Check Variable Nozzle Turbocharger (VNT). Specifically, check the electronic actuator position sensor G500 , including unplugging it for testing.
- When found in other engines:
- Check the factory repair manual since this fault can point to problems with several different sensors.
- Specifically in the BLB engine, faulty MAF wiring can trigger it.