Difference between revisions of "17114/P0730/001840"

From Ross-Tech Wiki
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
 
== 17114/P0730 - Gear: Incorrect Ratio ==
 
== 17114/P0730 - Gear: Incorrect Ratio ==
 +
 +
==== Possible Symptoms ====
 +
 +
* Malfunction Indicator Light (MIL) ON
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* Wiring and/or connections faulty
+
* Transmission Fluid contaminated
* Sensor Gear Position Indicator faulty
+
* Transmission faulty (Mechanical Problem)
* Mechanical failure
 
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Check wiring and connections
+
* Check Transmission Fluid (Color and Contamination)
* Check Sensor Gear Position Indicator
+
** Replace Transmission Fluid when necessary
 +
* Check Transmission Mechanics
 +
 
 +
==== Special Notes ====
 +
 
 +
* Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 14:10, 1 June 2009

17114/P0730 - Gear: Incorrect Ratio

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Transmission Fluid contaminated
  • Transmission faulty (Mechanical Problem)

Possible Solutions

  • Check Transmission Fluid (Color and Contamination)
    • Replace Transmission Fluid when necessary
  • Check Transmission Mechanics

Special Notes

  • Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.