Difference between revisions of "17114/P0730/001840"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 20: | Line 20: | ||
* Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module. | * Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module. | ||
| − | * When found in [[6-Speed Automatic Transmission (01J/Multitronic)]] | + | * When found in [[6-Speed Automatic Transmission (01J/Multitronic)]]: |
| − | * | + | ** Instructions on how to check the Transmission Fluid as well as Details on a special Test Kit can be found in TPI 2016661. TPI 2006088 may also be relevant. |
| + | ** A conversion from 6 to 7 Clutch Plates may be possible. See TPI 2004856 for Details. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 14:36, 1 June 2009
17114/P0730/001840 - Gear Ratio Monitoring: Incorrect Gear Ratio
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Transmission Fluid contaminated
- Transmission faulty (Mechanical Problem)
Possible Solutions
- Check Transmission Fluid (Color and Contamination)
- Replace Transmission Fluid when necessary
- Check Transmission Mechanics
Special Notes
- Transmission Damage may be caused by Engine Problems, make sure there are no other/relevant Fault Codes stored in Engine Control Module.
- When found in 6-Speed Automatic Transmission (01J/Multitronic):
- Instructions on how to check the Transmission Fluid as well as Details on a special Test Kit can be found in TPI 2016661. TPI 2006088 may also be relevant.
- A conversion from 6 to 7 Clutch Plates may be possible. See TPI 2004856 for Details.