Difference between revisions of "17426/P1018/004120"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 19: | Line 19: | ||
* Check/Replace Intake Manifold Runner Motor 2 (V275) | * Check/Replace Intake Manifold Runner Motor 2 (V275) | ||
** Perform Output Test | ** Perform Output Test | ||
| − | ** Perform System Test using VAS 6395 ''when applicable'' | + | ** Perform System Test using [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)] ''when applicable'' |
* Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings. | * Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings. | ||
* Check/Replace Intake Manifold Flap 2 | * Check/Replace Intake Manifold Flap 2 | ||
| Line 27: | Line 27: | ||
* When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s | * When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s | ||
** See TPI 2016504 for Details. | ** See TPI 2016504 for Details. | ||
| − | ** The VAS 6395 is needed for testing and replacing the V275 motor. | + | ** The [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)] is needed for testing and replacing the V275 motor. |
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 09:33, 10 November 2011
17426/P1018/004120 - Intake Manifold Runner (Bank 2): Lower Limit not reached
Possible Symptoms
- Malfunction Indicator Light (MIL) ON
Possible Causes
- Fuse(s) faulty
- Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275) faulty
- Intake Manifold Runner Motor 2 (V275) faulty
- Intake Manifold Flap 2 faulty
Possible Solutions
- Check Fuse(s)
- Check Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275)
- Check/Replace Intake Manifold Runner Motor 2 (V275)
- Perform Output Test
- Perform System Test using VAS 6395(A) when applicable
- Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings.
- Check/Replace Intake Manifold Flap 2
Special Notes
- When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s
- See TPI 2016504 for Details.
- The VAS 6395(A) is needed for testing and replacing the V275 motor.