Difference between revisions of "17426/P1018/004120"

From Ross-Tech Wiki
m
 
Line 19: Line 19:
 
* Check/Replace Intake Manifold Runner Motor 2 (V275)
 
* Check/Replace Intake Manifold Runner Motor 2 (V275)
 
** Perform Output Test
 
** Perform Output Test
** Perform System Test using [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)] ''when applicable''
+
** Perform System Test using [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)], or the latest [https://erwin.volkswagen.de/workshop/englisch/index.htm?https://erwin.volkswagen.de/workshop/englisch/pinfo/40457002000.htm VAS 6395(B)] ''when applicable''
 
* Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings.
 
* Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings.
 
* Check/Replace Intake Manifold Flap 2
 
* Check/Replace Intake Manifold Flap 2
Line 27: Line 27:
 
* When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s
 
* When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s
 
** See TPI 2016504 for Details.
 
** See TPI 2016504 for Details.
** The [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)] is needed for testing and replacing the V275 motor.
+
** The [https://erwin.volkswagen.de/workshop/englisch/pinfo/40457001000.htm VAS 6395(A)], or the latest [https://erwin.volkswagen.de/workshop/englisch/index.htm?https://erwin.volkswagen.de/workshop/englisch/pinfo/40457002000.htm VAS 6395(B)] is needed for testing and replacing the V275 motor.
  
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Latest revision as of 12:04, 5 October 2015

17426/P1018/004120 - Intake Manifold Runner (Bank 2): Lower Limit not reached

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275) faulty
  • Intake Manifold Runner Motor 2 (V275) faulty
  • Intake Manifold Flap 2 faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Intake Manifold Runner Motor 2 (V275)
  • Check/Replace Intake Manifold Runner Motor 2 (V275)
  • Check Linkage between Intake Manifold Runner Motor 2 (V275) and Intake Manifold Flap 2 Movement, Rust and when necessary use Lubricants to repair it. If the Flap is still sluggish, also lubricate the Flap Bearings.
  • Check/Replace Intake Manifold Flap 2

Special Notes

  • When found in Audi A4 (8E) OR Audi A6 (4F) OR Audi A8 (4E) OR Audi Q7 (4L): 2.7l and 3.0l V6 TDI s
    • See TPI 2016504 for Details.
    • The VAS 6395(A), or the latest VAS 6395(B) is needed for testing and replacing the V275 motor.