Difference between revisions of "17978/P1570/005488"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 20: | Line 20: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * If no other immobilizer related fault codes are stored and the [http://www.ross-tech.com/vag-com/cars/Immo3-measuring-blocks.html immobilizer related meas. blocks] are fine except ''Engine Start not allowed'', try cold-booting the car. Remove both battery cables from the battery. Short the battery cables together (away from the battery) for about 15 seconds. Reconnect the battery. ([http://forums.tdiclub.com/showthread.php?t=105291 Example]) | + | * If no other immobilizer related fault codes are stored and the [http://www.ross-tech.com/vag-com/cars/Immo3-measuring-blocks.html immobilizer related meas. blocks] are fine except ''Engine Start not allowed'' (see MVB 022.1), try cold-booting the car. Remove both battery cables from the battery. Short the battery cables together (away from the battery) for about 15 seconds. Reconnect the battery. ([http://forums.tdiclub.com/showthread.php?t=105291 Example]) |
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 10:47, 9 September 2006
17978/P1570 - Engine Start Blocked by Immobilizer
Possible Symptoms
- Engine starting but stalling immediately
Possible Causes
- Key(s) not matched
- Instrument Cluster not matched
- Engine Control Unit (ECU) not matched
- Engine Control Unit (ECU) Power Supply faulty
Possible Solutions
- Match Key(s)/Instrument Cluster/Engine Control Unit (ECU)
- Check Engine Control Unit (ECU) Power Supply (Relay)
Special Notes
- If no other immobilizer related fault codes are stored and the immobilizer related meas. blocks are fine except Engine Start not allowed (see MVB 022.1), try cold-booting the car. Remove both battery cables from the battery. Short the battery cables together (away from the battery) for about 15 seconds. Reconnect the battery. (Example)