Difference between revisions of "18042/P1634/005684"
From Ross-Tech Wiki
Gerrit Speek (talk | contribs) |
(No difference)
|
Revision as of 14:25, 19 June 2006
18042/P1634 - Accelerator Position Sensor 2 (G185): Signal too High
Possible Symptoms
- Unknown
Possible Causes
- Wiring and/or connections faulty
- Sensor (G185) faulty
Possible Solutions
- Have a look at the Pedal Position Sensor assembly, not the Throttle Body.
- Check all connections between ECU and accelerator pedal - of course the pedal itself could be defective too.
Special Notes
- There are 2 sensors in the accelerator pedal, both measure the same except that they are working in opposite directions. This means one counts from 0 to 100, while the other one counts from 100 to 0.