Difference between revisions of "18434/P2002/008194"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
|||
| Line 21: | Line 21: | ||
* Skoda Superb (3U) & VW Passat (3B) ''(Engine Codes: BGW, BSS, BWW)'' had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles. | * Skoda Superb (3U) & VW Passat (3B) ''(Engine Codes: BGW, BSS, BWW)'' had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles. | ||
| + | * With CBEA and CJAA engines, the factory documentation may show the wrong part location for the Exhaust Pressure Sensor 1 (G450). This sensor is in a foil pouch just behind the oil cap. | ||
| + | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 09:11, 8 October 2014
18434/P2002/008194 - Particle Filter Bank 1: Malfunction
Possible Symptoms
- Malfunction Indication Lamp (MIL) active
Possible Causes
- Exhaust Pressure Sensor (G450) faulty
- Diesel Particle Filter (DPF) faulty
Possible Solutions
- Check/Replace Exhaust Pressure Sensor (G450)
- Diesel Particle Filter (DPF)
- Perform Emergency Regeneration (Refer to Specifications!)
- Check/Replace Diesel Particle Filter (DPF)
Special Notes
- Skoda Superb (3U) & VW Passat (3B) (Engine Codes: BGW, BSS, BWW) had issues with faulty Exhaust Pressure Sensors (G450), they were defective from factory and due to a leaking sealing the measured values were incorrect and resultet in wrong calculated particle filter load and unsuccessful regeneration cycles.
- With CBEA and CJAA engines, the factory documentation may show the wrong part location for the Exhaust Pressure Sensor 1 (G450). This sensor is in a foil pouch just behind the oil cap.