Difference between revisions of "18565/P2133"

From Ross-Tech Wiki
(Created page with '__FORCETOC__ == 18565/P2133 - Throttle Position Sensor Bank 2: Signal too High == ==== Possible Symptoms ==== * MIL on * Reduced Power Output ==== Possible Causes ==== * Fau…')
 
 
(One intermediate revision by the same user not shown)
Line 23: Line 23:
  
 
* O2 sensor issues can also cause the following DTCs:
 
* O2 sensor issues can also cause the following DTCs:
**16610 - Throttle Pedal Position Sensor (G79): Implausible Signal
+
**[[16610/P0226]] - Throttle Pedal Position Sensor (G79): Implausible Signal
**18560 - Accelerator Position Sensor 2 (G185): Signal too High
+
**[[18560/P2128]] - Accelerator Position Sensor 2 (G185): Signal too High
 
* In some cases, O2 sensors will damage the ECM.  Ross Tech suggest to replace O2 sensors ''before'' replacing an ECM for this type of issue.
 
* In some cases, O2 sensors will damage the ECM.  Ross Tech suggest to replace O2 sensors ''before'' replacing an ECM for this type of issue.
  

Latest revision as of 18:50, 16 February 2012


18565/P2133 - Throttle Position Sensor Bank 2: Signal too High

Possible Symptoms

  • MIL on
  • Reduced Power Output

Possible Causes

  • Faulty Accelerator Pedal (very unlikely)
  • Wiring Harness Issue
  • Faulty ECM
  • O2 Sensor(s)

Possible Solutions

  • Inspect and test Wiring harness for Accelerator Pedal, see Repair Manual
  • Visually inspect O2 sensors for damage

Special Notes

  • O2 sensor issues can also cause the following DTCs:
    • 16610/P0226 - Throttle Pedal Position Sensor (G79): Implausible Signal
    • 18560/P2128 - Accelerator Position Sensor 2 (G185): Signal too High
  • In some cases, O2 sensors will damage the ECM. Ross Tech suggest to replace O2 sensors before replacing an ECM for this type of issue.