Difference between revisions of "18836/P2404/009220"

From Ross-Tech Wiki
 
Line 8: Line 8:
  
 
* Faulty Leak Detection Pump (V144)
 
* Faulty Leak Detection Pump (V144)
** Voltage supply problems to Leak Detection Pump (V144)
+
** Electrical issue, fails ohm testing
 +
** Mechanical failure, fails vacuum testing
 +
* Voltage supply problems to Leak Detection Pump (V144)
 
* Low or no vacuum supply to the Leak Detection Pump (V144)  
 
* Low or no vacuum supply to the Leak Detection Pump (V144)  
 
* Evaporative Emission (EVAP) Canister System leaking pressure
 
* Evaporative Emission (EVAP) Canister System leaking pressure

Latest revision as of 10:55, 16 February 2022

18836/P2404/009220 - EVAP Leak Detection Pump Sense Circuit: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Faulty Leak Detection Pump (V144)
    • Electrical issue, fails ohm testing
    • Mechanical failure, fails vacuum testing
  • Voltage supply problems to Leak Detection Pump (V144)
  • Low or no vacuum supply to the Leak Detection Pump (V144)
  • Evaporative Emission (EVAP) Canister System leaking pressure
  • Faulty (N80) Evap purge solenoid

Possible Solutions

  • Test Leak Detection Pump (V144) and it's wiring, see repair manual
    • Check voltage supply to Leak Detection Pump (V144) including J757 - Engine Component Power Supply Relay when applicable
  • Test vacuum supply to Leak Detection Pump (V144) with engine at idle
  • Pressure test Evaporative Emission (EVAP) Canister System for leaks, see repair manual
  • Test (N80) Evap purge solenoid for leaking system pressure into the intake manifold

Special Notes