18836/P2404/009220

From Ross-Tech Wiki
Revision as of 10:55, 16 February 2022 by Jef (talk | contribs) (→‎Possible Causes)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

18836/P2404/009220 - EVAP Leak Detection Pump Sense Circuit: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON

Possible Causes

  • Faulty Leak Detection Pump (V144)
    • Electrical issue, fails ohm testing
    • Mechanical failure, fails vacuum testing
  • Voltage supply problems to Leak Detection Pump (V144)
  • Low or no vacuum supply to the Leak Detection Pump (V144)
  • Evaporative Emission (EVAP) Canister System leaking pressure
  • Faulty (N80) Evap purge solenoid

Possible Solutions

  • Test Leak Detection Pump (V144) and it's wiring, see repair manual
    • Check voltage supply to Leak Detection Pump (V144) including J757 - Engine Component Power Supply Relay when applicable
  • Test vacuum supply to Leak Detection Pump (V144) with engine at idle
  • Pressure test Evaporative Emission (EVAP) Canister System for leaks, see repair manual
  • Test (N80) Evap purge solenoid for leaking system pressure into the intake manifold

Special Notes