Difference between revisions of "18995/P2563/009571"

From Ross-Tech Wiki
m (Sebastian moved page 009571/P2563 to 18995/P2563/009571 without leaving a redirect)
(DTC numbers and page name corrected, general cleanup / re-write)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
  
== 009571/P2563 - Turbocharger Boost Control Position Sensor Circuit ==
+
== 18995/P2563/009571 - Turbocharger Boost Control Position Sensor Circuit: Implausible Signal ==
  
 
==== Possible Symptoms ====
 
==== Possible Symptoms ====
  
* MIL on
+
* Malfunction Indicator Lamp (MIL) ON
 +
* Power Loss
  
 
==== Possible Causes ====
 
==== Possible Causes ====
  
* G581 Faulty
+
* Wiring and/or Connections from/to Vane Position Sensor (G581) faulty
* Wiring and/or connections faulty
+
* Engine Control Module (ECM) faulty
* ECM faulty
+
* Vane Position Sensor (G581) faulty
 +
** Binding Issues due to Adjustment/Turbocharger
 +
** Excessive Carbon build-up
 +
* Vacuum Leak from/to Turbocharger (Wastegate) Actuator and Solenoid Valve for Boost Pressure Control (N75)
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
  
* Check fuses
+
* Check/Replace Fuses
* Check wiring and connections
+
* Check Wiring and/or Connections from/to Vane Position Sensor (G581)
* Ohm test G581, see factory repair manual
+
* Check Vane Position Sensor (G581)
 
+
** Perform Ohm Test
 
+
* Check Mechanical Turbocharger Operation
== 009571/P2563 - Turbocharger Boost Control Position Sensor Circuit: Implausible Signal ==
+
** Rule out binging and excessive Carbon build-up
This fault code may be caused when the Actual and Specified Turbocharger requests are considered Implausible by the engine controller.
+
* Check Vacuum Supply from/to Solenoid Valve for Boost Pressure Control (N75) and Turbocharger (Wastegate) Actuator
 
 
==== Possible Symptoms ====
 
 
 
* MIL on
 
 
 
==== Possible Causes ====
 
 
 
* Wiring and/or connections faulty
 
* ECM faulty
 
* G581 (Vane Position Sensor) Faulty or Binding due to adjustment/Turbocharger issues
 
* Vacuum leak to/from Turbocharger (wastegate) actuator and Solenoid Valve for Boost Pressure Control (N75)  
 
 
 
==== Possible Solutions ====
 
 
 
* Check fuses
 
* Check wiring and connections
 
* Ohm test G581, see factory repair manual
 
* Check mechanical Turbocharger operation to rule out binging and excessive carbon
 
* Check vacuum supply to/from Solenoid Valve for Boost Pressure Control (N75) and Turbocharger (wastegate) actuator
 
  
 
==== Special Notes ====
 
==== Special Notes ====
 +
* This fault code may be caused when the Actual and Specified Turbocharger requests are considered Implausible by the engine controller.
 
When this fault is found in the NAR Market 2.0L CR TDI:
 
When this fault is found in the NAR Market 2.0L CR TDI:
 
* Measuring Block Group 034.2 (specified) and 034.3 (actual) G581 Vane Position Sensor values can be logged to see if the fields should mirror each other or deviate to confirm a problem.
 
* Measuring Block Group 034.2 (specified) and 034.3 (actual) G581 Vane Position Sensor values can be logged to see if the fields should mirror each other or deviate to confirm a problem.

Revision as of 04:55, 2 March 2015


18995/P2563/009571 - Turbocharger Boost Control Position Sensor Circuit: Implausible Signal

Possible Symptoms

  • Malfunction Indicator Lamp (MIL) ON
  • Power Loss

Possible Causes

  • Wiring and/or Connections from/to Vane Position Sensor (G581) faulty
  • Engine Control Module (ECM) faulty
  • Vane Position Sensor (G581) faulty
    • Binding Issues due to Adjustment/Turbocharger
    • Excessive Carbon build-up
  • Vacuum Leak from/to Turbocharger (Wastegate) Actuator and Solenoid Valve for Boost Pressure Control (N75)

Possible Solutions

  • Check/Replace Fuses
  • Check Wiring and/or Connections from/to Vane Position Sensor (G581)
  • Check Vane Position Sensor (G581)
    • Perform Ohm Test
  • Check Mechanical Turbocharger Operation
    • Rule out binging and excessive Carbon build-up
  • Check Vacuum Supply from/to Solenoid Valve for Boost Pressure Control (N75) and Turbocharger (Wastegate) Actuator

Special Notes

  • This fault code may be caused when the Actual and Specified Turbocharger requests are considered Implausible by the engine controller.

When this fault is found in the NAR Market 2.0L CR TDI:

  • Measuring Block Group 034.2 (specified) and 034.3 (actual) G581 Vane Position Sensor values can be logged to see if the fields should mirror each other or deviate to confirm a problem.
  • NAR market vehicles that had TPI 2025464 | TSB 21-11-01 -or- the latest TPI 2025464/5 | TSB 21-13-01 completed to prevent no-start conditions in cold weather caused by a frozen intercooler may want to see this thread.