Difference between revisions of "19143/P2711/010001"

From Ross-Tech Wiki
m
Line 1: Line 1:
__FORCETOC__
 
 
== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement ==
 
== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement ==
 +
 +
=== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No Signal/Communication ===
 +
 +
==== Possible Symptoms ====
 +
 +
* Malfunction Indicator Light (MIL) ON
 +
* Transmission Malfunction
 +
* Erratic Driving Behavior
 +
 +
==== Possible Causes ====
 +
 +
* Output Shaft Speed Sensor 1/2 (G501/G502) faulty
 +
* Mechatronic Unit for Double Clutch Transmission (J743) faulty
 +
 +
==== Possible Solutions ====
 +
 +
* Check Output Shaft Speed Sensor 1/2 (G501/G502)
 +
** Check Measuring Value Blocks (MVB)
 +
* Check/Replace Mechatronic Unit for Double Clutch Transmission (J743)
 +
 +
==== Special Notes ====
 +
 +
* When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]], check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged.
 +
  
 
=== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation ===
 
=== 19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation ===
Line 8: Line 31:
 
* When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed Direct Shift Gearbox (DSG/02E)#Basic Setting|Basic Setting]].<br>
 
* When found in [[6-Speed Direct Shift Gearbox (DSG/02E)]], perform [[6-Speed Direct Shift Gearbox (DSG/02E)#Basic Setting|Basic Setting]].<br>
  
 +
__FORCETOC__
 
[[Category:Fault Codes]]
 
[[Category:Fault Codes]]

Revision as of 08:29, 29 June 2010

19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement

19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No Signal/Communication

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • Transmission Malfunction
  • Erratic Driving Behavior

Possible Causes

  • Output Shaft Speed Sensor 1/2 (G501/G502) faulty
  • Mechatronic Unit for Double Clutch Transmission (J743) faulty

Possible Solutions

  • Check Output Shaft Speed Sensor 1/2 (G501/G502)
    • Check Measuring Value Blocks (MVB)
  • Check/Replace Mechatronic Unit for Double Clutch Transmission (J743)

Special Notes

  • When found in 6-Speed Direct Shift Gearbox (DSG/02E), check Measuring Value Block (MVB) 008. The Output Shaft Speeds should align with the Input Shaft Speed during a Test Drive (Tiptronic in Gear 1/2) with the Clutch engaged.


19143/P2711/010001 - Unexpected / Implausible Mechanical Gear Disengagement: No or Incorrect Basic Setting / Adaptation

Special Notes