2.0l TFSI (AXX/BGB/BPJ/BPY/BWA)

From Ross-Tech Wiki
Revision as of 09:08, 30 July 2006 by RtWiKiSyS0p (talk | contribs)

Coding

Byte 00 Manufacturer
01 Audi/Seat
04 Volkswagen
Byte 01 Model
03 Audi A3 (8P) / Seat Leon (1P) / VW Golf (1K)
04 Audi A4 Limousine (8EC) / VW Passat (3C)
05 Audi A6 Limousine (4F2)
0C Audi A4 Avant (8ED)
0D Audi A6 Avant (4F5)
1C Audi A4 Cabriolet (8H) / VW Eos (1F7)
Byte 02 Market
00 Europe / Rest of World (RoW)
01 North America
02 Russia (GUS) / China
04 South Africa
08 Mexico / Taiwan / Korea
Byte 03 Emissions
00 EU-II
03 EU-IV
06 USA LEV
0A USA ULEV II
Byte 04 Transmission
02 Automatic Transmission "multotronic" (01J)
18 6-Speed Manual Tansmission
19 Automatic Transmission (09L)
1C 6-Speed Direct Shift Gearbox (DSG/02E)
Byte 05 Special Functions I
03 Front-Wheel-Drive (FWD) / Climate Control not equipped
07 Front-Wheel-Drive (FWD) / Climate Control equipped
0C All-Wheel-Drive (AWD) / Climate Control not equipped
0F All-Wheel-Drive (AWD) / Climate Control equipped
Byte 06 Special Functions II
00 w/o Cruise Control/Suspension Levelling/Trailer
01 with Cruise Control
02 with Adaptive Cruise Control (ACC)
04 with Suspension Levelling
05 with Suspension Levelling/Cruise Control
06 with Suspension Levelling/Adaptive Cruise Control (ACC)
08 with Trailer
09 with Trailer/Cruise Control
0A with Trailer/Adaptive Cruise Control (ACC)
0C with Trailer/Suspension Levelling
0D with Trailer/Suspension Levelling/Cruise Control
0E with Trailer/Suspension Levelling/Adaptive Cruise Control (ACC)
Byte 07 Cooling
18 1 Cooling Fan
20 2 Cooling Fans
60 2 Cooling Fans + Additional Water Pump

Adaptation

Basic Setting

Throttle Body

Kick Down

Fuel Pump

Intake Manifold Runner

Prerequisites:

  • Ignition ON
  • Engine OFF
  • System voltage at least 11.0 V.

[Select]
[01 - Engine]
[Basic Settings - 04]
Group 142
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Wait until Field 4 shows "ADP. O.K.".
[Done, Go Back]
[Close Controller, Go Back - 06]

  • Switch Ignition OFF for at least 60 seconds.

Readiness

[Select]
[01 - Engine]
[Basic Settings - 04]
Group 200
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
Firmly press Brake Pedal and Throttle Pedal (Full Throttle) at once to activate the basic setting.
Field 1 shows the steps counter, which counts down to 0 - then setting readiness is done.
Stay on the pedals as long as the procedure lasts.
[Done, Go Back]
[Close Controller, Go Back - 06]