Difference between revisions of "6-Speed Automatic Transmission (AT) - 09E/09L/0AT/0B6 - Adaption and drive sequence"
(Created page with "__FORCETOC__ '''General Information''' This is a general page that applies to 09E/09L/0AT/0B6 6-Speed Automatic Transmission (AT) transmissions which are mounted Longitudinal...") |
|||
| Line 10: | Line 10: | ||
* '''Audi Q5''' | * '''Audi Q5''' | ||
** 2008+ [[Audi Q5 (8R) | Audi Q5 (8R/FP)]] | ** 2008+ [[Audi Q5 (8R) | Audi Q5 (8R/FP)]] | ||
| − | + | * '''Audi A6''' | |
| + | ** 2006-2011 [[Audi A6/S6/RS6/allroad (4F) | Audi A6/S6/RS6/allroad (4F/FB)]] | ||
The TSB/TPI, Adaptation and Measuring Block data we have available at this time is located in [http://forums.ross-tech.com/showthread.php?5676-Audi-A4-B7-Hard-Down-Shifting-at-low-speeds this thread]. This Wiki page will include additional information at a later point in time. | The TSB/TPI, Adaptation and Measuring Block data we have available at this time is located in [http://forums.ross-tech.com/showthread.php?5676-Audi-A4-B7-Hard-Down-Shifting-at-low-speeds this thread]. This Wiki page will include additional information at a later point in time. | ||
| Line 28: | Line 29: | ||
=== Defined Test Drive === | === Defined Test Drive === | ||
== Replacement == | == Replacement == | ||
| + | == Special Notes == | ||
| + | Several TSB/TPIs exist for the transmission codes covered. Always check the repair manual for the car in question but this is a (small) list: | ||
| + | *NAR market: | ||
| + | ** TPI 2028053 applies to 2005-2009 (B7 chassis) [[Audi A4/S4/RS4/Cabriolet (8E/8H)]] vehicles with the 09L transmission. | ||
| + | ** TPI 2028279 applies to 2006-2011 [[Audi A6/S6/RS6/allroad (4F) | Audi A6/S6/RS6/allroad (4F/FB)]] with the 09L transmission. | ||
| + | * RoW market: | ||
| + | ** TPI 2007190 applies to several modules: A4, A6, A8 with automatic gearbox (09L, 09E) | ||
[[Category:Transmissions]] | [[Category:Transmissions]] | ||
Revision as of 11:48, 2 November 2016
General Information This is a general page that applies to 09E/09L/0AT/0B6 6-Speed Automatic Transmission (AT) transmissions which are mounted Longitudinal in vehicles such as the:
- Audi A4/S4:
- 2005-2009 (B7 chassis) Audi A4/S4/RS4/Cabriolet (8E/8H)
- 2008+ Audi A4/S4/RS4 (8K/FL)
- Audi 54/S5:
- 2007+ Audi A5/S5 (8T/FH/FR)
- Audi Q5
- 2008+ Audi Q5 (8R/FP)
- Audi A6
- 2006-2011 Audi A6/S6/RS6/allroad (4F/FB)
The TSB/TPI, Adaptation and Measuring Block data we have available at this time is located in this thread. This Wiki page will include additional information at a later point in time.
In the meanwhile, Registered customers seeking assistance can post the complete VCDS Auto-Scan with the vehicle repair history in addition to any vehicle functionality concerns in that thread.
Additional information can be found in the Official Factory Repair Information.
Coding
Measuring Blocks
Measuring Blocks related to adaptation information for Clutches A, B, C, D and E can be found in the mentioned thread linked above.
Basic Setting
The Basic Setting function is not applicable to this transmission controller.
Adaptation
Adaptation channel 001 is only available in vehicles manufactured after a production split in 2006. Some 2004-2006 model year vehicles may support the Adaptation function after a dealer level flash update has been performed per the applicable TSBs/TPIs which can be located in the [[Official Factory Repair Information].
Special Procedures
Defined Test Drive
Replacement
Special Notes
Several TSB/TPIs exist for the transmission codes covered. Always check the repair manual for the car in question but this is a (small) list:
- NAR market:
- TPI 2028053 applies to 2005-2009 (B7 chassis) Audi A4/S4/RS4/Cabriolet (8E/8H) vehicles with the 09L transmission.
- TPI 2028279 applies to 2006-2011 Audi A6/S6/RS6/allroad (4F/FB) with the 09L transmission.
- RoW market:
- TPI 2007190 applies to several modules: A4, A6, A8 with automatic gearbox (09L, 09E)