Difference between revisions of "65535"
From Ross-Tech Wiki
Gerrit Speek (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 6: | Line 6: | ||
==== Possible Causes ==== | ==== Possible Causes ==== | ||
| − | * | + | * Control Module housing leaky > Control Module wet |
| − | * | + | * Wiring from/to Control Module faulty |
| − | * Control Module | + | * Control Module faulty |
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
| − | * Check / Clean | + | * Check/Clean Wiring from/to Control Module |
* Replace Control Module | * Replace Control Module | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| + | * This fault has NOT to be ignored when found in a major and/or critical system (Airbag, ABS etc.). | ||
| + | * When stored in other systems (Radio etc.) the general suggestion is to ignore it unless you notice functional limitations. | ||
* Audi Airbag 6 & 7 | * Audi Airbag 6 & 7 | ||
** Problem: A fault of the acceleration sensor may result in the above fault. | ** Problem: A fault of the acceleration sensor may result in the above fault. | ||
Revision as of 03:43, 25 November 2006
Internal Control Module Memory Error
Internal Control Module Memory Error
Possible Causes
- Control Module housing leaky > Control Module wet
- Wiring from/to Control Module faulty
- Control Module faulty
Possible Solutions
- Check/Clean Wiring from/to Control Module
- Replace Control Module
Special Notes
- This fault has NOT to be ignored when found in a major and/or critical system (Airbag, ABS etc.).
- When stored in other systems (Radio etc.) the general suggestion is to ignore it unless you notice functional limitations.
- Audi Airbag 6 & 7
- Problem: A fault of the acceleration sensor may result in the above fault.
- Solution: Replace Airbag control module and both acceleration sensors.