From Ross-Tech Wiki
Revision as of 02:43, 25 November 2006 by RtWiKiSyS0p (talk | contribs)

Internal Control Module Memory Error

Internal Control Module Memory Error

Possible Causes

  • Control Module housing leaky > Control Module wet
  • Wiring from/to Control Module faulty
  • Control Module faulty

Possible Solutions

  • Check/Clean Wiring from/to Control Module
  • Replace Control Module

Special Notes

  • This fault has NOT to be ignored when found in a major and/or critical system (Airbag, ABS etc.).
  • When stored in other systems (Radio etc.) the general suggestion is to ignore it unless you notice functional limitations.
  • Audi Airbag 6 & 7
    • Problem: A fault of the acceleration sensor may result in the above fault.
    • Solution: Replace Airbag control module and both acceleration sensors.