Difference between revisions of "Audi A3 (8P) Headlight Aim Control (Xenon Plus)"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) m |
RtWiKiSyS0p (talk | contribs) m |
||
Line 19: | Line 19: | ||
== Basic Setting == | == Basic Setting == | ||
+ | === Headlight Adjustment === | ||
+ | |||
+ | '''[Select]'''<br> | ||
+ | '''[55 - Xenon Range]'''<br> | ||
+ | '''[Basic Settings - 04]'''<br> | ||
+ | Group 001<br> | ||
+ | '''[Go!]'''<br> | ||
+ | Activate the Basic Setting.<br> | ||
+ | '''[ON/OFF/Next]'''<br> | ||
+ | * The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds). | ||
+ | * Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target. | ||
+ | '''[ON/OFF/Next]'''<br> | ||
+ | The adjustment should now be learned.<br> | ||
+ | '''[Done, Go Back]'''<br> | ||
+ | Don't forget to check/clear fault codes afterwards.<br> | ||
+ | '''[Close Controller, Go Back - 06]'''<br> |
Revision as of 22:07, 14 March 2007
Coding
- 0000001 = Audi A3 (8P) Front-Wheel-Drive (FWD)
- 0000002 = Audi A3 (8P) All-Wheel-Drive (AWD)
- 0000003 = Audi A6 (4F) with Steel Suspension
- 0000004 = Audi A6 (4F) with Air Suspension
- 0000005 = Audi A4 (8E)
- 0000006 = Audi A8 (4E)
- 0000007 = Audi Q7 (4L) with Steel Suspension
- 0000008 = Audi Q7 (4L) with Air Suspension
- 0000009 = Audi TT (8J) with Steel Suspension and Front-Wheel-Drive (FWD)
- 0000010 = Audi TT (8J) with Steel Suspension and All-Wheel-Drive (AWD)
- 0000011 = Audi TT (8J) with Magnetic Ride
Adaptation
Basic Setting
Headlight Adjustment
[Select]
[55 - Xenon Range]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
- The meas. block field now shows "Wait" and should switch to "Adjust Headlights" then (this may take up to 10 seconds).
- Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
Don't forget to check/clear fault codes afterwards.
[Close Controller, Go Back - 06]