Difference between revisions of "Audi A4 (8D) Brake Electronics (Bosch 5.3 ABS/EDS/ASR/ESP)"

From Ross-Tech Wiki
 
(14 intermediate revisions by 4 users not shown)
Line 2: Line 2:
 
== Login ==
 
== Login ==
  
* '''Notes''':
+
'''''Note #1''': After Login has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.''<br>
** After Login has been carried out you need to recode the Control Module.
+
'''''Note #2''': For Audi A8 (4D) always use '''4''' as Selection for Brakes.''<br>
** '''Do NOT exit the Control Module in between the individual steps'''.
+
'''''Note #3''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. <br> Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br>
** For Audi A8 (4D) always use '''4''' as Selection for Brakes.
 
** The PR-Codes ( such as 1LB ) can be found in a [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png sticker near the spare tire well].
 
  
  
Line 15: Line 13:
 
* '''0x?xx''': ''Brakes''
 
* '''0x?xx''': ''Brakes''
 
** 3 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
 
** 3 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
** 4 = FN2/HP2 (Dual-Piston) [PR-1LX]
+
** 4 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL/1LJ]
** 5 = FN3 (Teves/ATE) [PR-1LB]
+
** 5 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
 
** 6 = C54 (Lucas) [PR-1LZ]
 
** 6 = C54 (Lucas) [PR-1LZ]
 
* '''0xx?x''': ''Engine''
 
* '''0xx?x''': ''Engine''
Line 27: Line 25:
 
** 7 = Automatic (01L/01N/01V)
 
** 7 = Automatic (01L/01N/01V)
 
** 9 = Multitronic (01J)
 
** 9 = Multitronic (01J)
 
  
 
== Coding ==
 
== Coding ==
  
* '''Notes'''
+
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
** Coding is accepted after a specific login has been carried out.
+
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.'' '''Do NOT exit the Control Module in between the individual steps'''<br>
** After successful coding the Steering Angle Sensor Basic Setting needs to be carried out.
+
'''''Note #3''': For Audi A8 (4D) always use '''3''' as Selection for Brakes.''<br>
** '''Do NOT exit the Control Module in between the individual steps'''.
+
'''''Note #4''': The Production Codes (PR-Code) such as '''1LX''' can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br>
** For Audi A8 (4D) always use '''3''' as Selection for Brakes.
+
'''''Note #5''': In some cases, you will need to enter a non-zero WorkShop Code, such as 12345-123-12345.''<br>
** In some cases, you will need to enter a non-zero WSC, such as 12345-123-12345.
 
** The PR-Codes ( such as 1LB ) can be found in a [http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png sticker near the spare tire well].
 
  
  
Line 46: Line 41:
 
* '''0x?xx''': ''Brakes''
 
* '''0x?xx''': ''Brakes''
 
** 1 = C54 (Lucas) [PR-1LZ]
 
** 1 = C54 (Lucas) [PR-1LZ]
** 2 = FN3 (Teves/ATE) [PR-1LB]
+
** 2 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
** 3 = FN2/HP2 (Dual-Piston) [PR-1LX]
+
** 3 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL/1LJ]
 
** 4 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
 
** 4 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
 
* '''0xx?x''': ''Engine''
 
* '''0xx?x''': ''Engine''
Line 58: Line 53:
 
** 7 = Automatic (01L/01N/01V)
 
** 7 = Automatic (01L/01N/01V)
 
** 9 = Multitronic (01J)
 
** 9 = Multitronic (01J)
 
  
 
== Basic Setting ==
 
== Basic Setting ==
Line 64: Line 58:
 
=== Steering Angle Sensor (G85) Calibration ===
 
=== Steering Angle Sensor (G85) Calibration ===
  
'''''Note''': ''Make sure the above Login and Coding have been done successfully before proceeding.''<br>
+
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br>
  
 
'''[Meas. Blocks - 08]'''<br>
 
'''[Meas. Blocks - 08]'''<br>
 
Group 005 Field 1 (Steering Angle Sensor -G85-)<br>
 
Group 005 Field 1 (Steering Angle Sensor -G85-)<br>
Turn steering wheel at least 30 ° left and back straight ahead.<br>
 
 
Specification: 0.0 °<br>
 
Specification: 0.0 °<br>
 
Tolerance (when straight): ±5.0 °<br>
 
Tolerance (when straight): ±5.0 °<br>
Line 86: Line 79:
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
  
'''[Close Controller, Go Back - 06]'''<br>
+
==== Note ====
 +
After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal.  Please see [[01486]].
 +
 
 +
 
 +
== Video Link ==
 +
=== Bosch 5.3 and 5.7 ABS with ESP, Coding ===
 +
 
 +
[[File:Titlescreen.jpg|200px|link=http://www.youtube.com/watch?v=G7YRiVYrLjo]]
 +
 
 +
http://www.youtube.com/watch?v=G7YRiVYrLjo

Latest revision as of 09:25, 19 September 2022

Login

Note #1: After Login has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.
Note #2: For Audi A8 (4D) always use 4 as Selection for Brakes.
Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual.
Click here to see an Example of a Sticker.


  • 0?xxx: Chassis
    • 5 = Audi A8 (4D)
    • 7 = Audi A6 (4B)
    • 9 = Audi A4 (8D) / VW Passat (3B)
  • 0x?xx: Brakes
    • 3 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
    • 4 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL/1LJ]
    • 5 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
    • 6 = C54 (Lucas) [PR-1LZ]
  • 0xx?x: Engine
    • 5 = 4/6/8 Cyl. Diesel
    • 7 = 4/5 Cyl. Gasoline
    • 9 = 6/8/12 Cyl. Gasoline
  • 0xxx?: Transmission
    • 3 = Manual with Low Range (only Audi A6 Allroad)
    • 5 = Manual
    • 7 = Automatic (01L/01N/01V)
    • 9 = Multitronic (01J)

Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out. Do NOT exit the Control Module in between the individual steps
Note #3: For Audi A8 (4D) always use 3 as Selection for Brakes.
Note #4: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345-123-12345.


  • 0?xxx: Chassis
    • 4 = Audi A4 (8D) / VW Passat (3B)
    • 6 = Audi A6 (4B)
    • 8 = Audi A8 (4D)
  • 0x?xx: Brakes
    • 1 = C54 (Lucas) [PR-1LZ]
    • 2 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
    • 3 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL/1LJ]
    • 4 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
  • 0xx?x: Engine
    • 5 = 4/6/8 Cyl. Diesel
    • 7 = 4/5 Cyl. Gasoline
    • 9 = 6/8/12 Cyl. Gasoline
  • 0xxx?: Transmission
    • 3 = Manual with Low Range (only Audi A6 Allroad)
    • 5 = Manual
    • 7 = Automatic (01L/01N/01V)
    • 9 = Multitronic (01J)

Basic Setting

Steering Angle Sensor (G85) Calibration

Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Login - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

Note

After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please see 01486.


Video Link

Bosch 5.3 and 5.7 ABS with ESP, Coding

Titlescreen.jpg

http://www.youtube.com/watch?v=G7YRiVYrLjo