Audi A4 (8E) Instrument Cluster (8EC/8ED/8HE)

From Ross-Tech Wiki
Revision as of 10:25, 29 May 2007 by RtWiKiSyS0p (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Coding

  • 00??xxx: Options I
    • +00 = 1. K-Number (Europe/USA/Rest of World)
    • +01 = Smaller Fuel Tank Volume (All-Wheel-Drive)
    • +02 = Side Marker Lights Indicator Lamp inactive
    • +04 = 3. K-Number (Rental Cars)
    • +08 = 2. K-Number (Australia)
    • +16 = Clutch Pedal Switch Operation in FIS Display
  • 00xx?xx: Country
    • 0 = Germany (D)
    • 1 = Rest of World (RoW)
    • 2 = USA (US)
    • 3 = Canada (CAN)
    • 4 = Great Britain (GB)
    • 5 = Japan (JP)
    • 6 = Saudi Arabia
    • 7 = Australia (AUS)
  • 00xxx?x: Seatbelt Warning
    • 0 = No Seatbelt Warning
    • 1 = Seatbelt Warning Europe-NCAP
    • 2 = Seatbelt Warning USA and Canada (NAR old)
    • 3 = Seatbelt Warning USA and Canada (NAR new)
    • 4 = Seatbelt Warning Europe-NCAP (incl. passenger)
    • 5 = Seatbelt Warning USA and Canada old (incl. passenger)
    • 6 = Seatbelt Warning USA and Canada NAR new (incl. passenger)
  • 00xxxx?: Options II
    • 1 = Standard (< 11/2006)
    • 4 = Washer Fluid Warning inactive (11/2006 >)
    • 8 = Washer Fluid Warning active (11/2006 >)


Adaptation

Channel 029: Tank Characteristic (Fuel Level Sensor 2)

Parallel shift of tank characteristic by +/- 32 Ohm. Only for Quattro models.

  • Standard Value: 128
  • Value Range: 96...160 (-8.0...+8.0 l)
  • Increments: 1 = 1 Ohm = 1/4 l

Channel 030: Tank Characteristic (Fuel Level Sensor 1)

Parallel shift of tank characteristic by +/- 32 Ohm.

  • Standard Value: 128
  • Value Range: 96...160 (-8.0...+8.0 l)
  • Increments: 1 = 1 Ohm = 1/4 l

Channel 032: Tank Characteristic (Not detactable Tank Volume)

The tank volume which is not recordable by the fuel gauge sender(s).

Channel 033: Tank Characteristic (Full Calibration)

Non-parallel shift of the tank characterictic above a readout of 1/2. To start the adaptation enter '65535' as new value.

  • Standard Value: 128
  • Value Range: 112...144 (-4.0...+4.0 l)
  • Increments: 1 = 1 Ohm = 1/4 l

Channel 034: Tank Characteristic (Dry Calibration)

Channel 035: Speed Threshold

This value represents the speed threshold for the dynamic oil pressure system. The threshold can be raised in increments of 250 RPM.

Channel 060: CAN-Databus Powertrain (Installation List)

  • +00001 = Engine (Standard)
  • +00002 = Automatic Transmission (Optional)
  • +00004 = Brake (Standard)
  • +00016 = Airbag (Standard)
  • +01024 = Instrument Cluster (Standard)

Channel 061: CAN-Databus Comfort (Installation List)

  • +00001 = Central Electronics (Standard)
  • +00002 = Comfort System (Standard)
  • +00064 = Trailer (Optional)
  • +00128 = Convertible Top (Optional)
  • +00256 = Instrument Cluster (Standard)
  • +00512 = Tire Pressure Control (Optional)
  • +01024 = Steering Column Electronics (Standard)
  • +02048 = Climate Control (Standard)
  • +32768 = Auxiliary Heating (Optional)


Channel 062: CAN-Databus Infotainment (Installation List)

  • +00001 = Radio (Optional)
  • +00002 = Telephone (Optional)
  • +00004 = Navigation (Optional)
  • +00008 = Telematics (Optional)
  • +00016 = Intrument Cluster (Standard - only coded with 2nd Component)

Channel 099: Transport Mode

  • 0 = inactive
  • 1 = active

Note: Some head units require a seperate transport mode deactivation (Adress 56 > Adaptation Channel 099).