Difference between revisions of "Audi A5 (8T) Steering Wheel Electronics"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) |
||
| Line 1: | Line 1: | ||
__FORCETOC__ | __FORCETOC__ | ||
== Coding == | == Coding == | ||
| + | ''The following coding options should give you an overview about the available settings, due to different control modules and equipment in the car the actual choices may differ for the specific model you are working on and the Long Coding Assistant present the right choices for you.'' | ||
| + | |||
| + | * Rear Wiper (Avant/Wagon) installed | ||
| + | * Board Computer (Driver Information System/DIS) installed | ||
| + | * Cruise Control System (CCS) installed | ||
| + | * Adaptive Cruise Control (ACC) installed | ||
| + | * Multi-Function Steering Wheel (MFL) installed | ||
| + | * Tiptronic installed (ONLY with Multi-Function Steering Wheel) | ||
| + | * Lane Assistant (Vibration Motor) installed | ||
| + | |||
| + | |||
== Security Access == | == Security Access == | ||
* 40168 = Basic Setting Enabling | * 40168 = Basic Setting Enabling | ||
Revision as of 16:03, 1 January 2009
Coding
The following coding options should give you an overview about the available settings, due to different control modules and equipment in the car the actual choices may differ for the specific model you are working on and the Long Coding Assistant present the right choices for you.
- Rear Wiper (Avant/Wagon) installed
- Board Computer (Driver Information System/DIS) installed
- Cruise Control System (CCS) installed
- Adaptive Cruise Control (ACC) installed
- Multi-Function Steering Wheel (MFL) installed
- Tiptronic installed (ONLY with Multi-Function Steering Wheel)
- Lane Assistant (Vibration Motor) installed
Security Access
- 40168 = Basic Setting Enabling
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[16 - Steering Wheel]
Turn steering wheel at least 30 ° left or right and back straight ahead (Tolerance: ±5.0 °).
[Security Access - 16]
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
After a successful basic setting, field 3 should say "OK".
[Done, Go Back]
[Meas. Blocks - 08]
Group 032 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±1.5 °
[Done, Go Back]