Difference between revisions of "Audi A6 (4B) Central Locking"

From Ross-Tech Wiki
 
(2 intermediate revisions by one other user not shown)
Line 13: Line 13:
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
'''[46 - Comfort System]'''<br>
+
'''[35 - Centr. Locks]'''<br>
 
'''[Adaptation - 10]'''<br>
 
'''[Adaptation - 10]'''<br>
 
Channel 021.<br>
 
Channel 021.<br>
Line 26: Line 26:
  
 
'''Note:''' ''You can check the current memory positions using Meas. Block 007.''
 
'''Note:''' ''You can check the current memory positions using Meas. Block 007.''
 
  
 
=== Special Notes ===
 
=== Special Notes ===
Line 32: Line 31:
 
The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
 
The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.
 
* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:  
 
* If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:  
** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''
+
** ''Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test]. ''<br>
 +
 
 +
* If Adaptation Channel 21 is not available the control module does NOT support matching remotes with VCDS (or any scan tool). In those cases the remote matching procedure as per the Repair Manual and/or vehicle Owner's Manual will need to be completed.
 +
** In those cases, Measuring Block group 007 can still be used to verify the positions.

Latest revision as of 19:31, 13 July 2011


Coding

VCDS will display a coding chart a pop-up balloon while connected to the vehicle.
Add the sum of the options to configure the correct coding.


Adaptation

Channel 021: Remote Control Matching

[Select]
[35 - Centr. Locks]
[Adaptation - 10]
Channel 021.
[Read]

  • Choose the memory position you want the new key be matched on by entering it's number (e.g. "3" for memory position 3). Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].

[Test]

  • Now press any button on the remote you want to match.
  • The meas. block field above will change from Not Recogn. to Recognized.

[Save]

[Done, Go Back]
[Close Controller, Go Back - 06]

Note: You can check the current memory positions using Meas. Block 007.

Special Notes

The 4B platform comfort system module has assigned positions, like parking spots 1, 2, 3 and 4, for each remote. This is critical when matching new remotes.

  • If you are having problems with the Remote Control Matching, please pay special attention to the instructions above:
    • Make sure to TYPE IN the number instead of scrolling up to it, otherwise you will not be able to click [Test].
  • If Adaptation Channel 21 is not available the control module does NOT support matching remotes with VCDS (or any scan tool). In those cases the remote matching procedure as per the Repair Manual and/or vehicle Owner's Manual will need to be completed.
    • In those cases, Measuring Block group 007 can still be used to verify the positions.