Difference between revisions of "Audi A6 (4F) Parking Brake"

From Ross-Tech Wiki
Line 22: Line 22:
 
== Basic Setting ==
 
== Basic Setting ==
 
=== Open Rear Parking Brake ===
 
=== Open Rear Parking Brake ===
 +
 +
Cycle the Parking Brake ON, then OFF first.
  
 
'''[Select]'''<br>
 
'''[Select]'''<br>
Line 28: Line 30:
 
Group 007<br>
 
Group 007<br>
 
'''[Go!]'''<br>
 
'''[Go!]'''<br>
Activate the Basic Setting.<br>
+
The brake pads will then now opening.<br>
'''[ON/OFF/Next]'''<br>
 
The brake pads are now opening.<br>
 
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>
+
'''[Close Controller, Go Back - 06]'''<br>
 +
It is normal for the LED in the parking brake switch and the warning lamp in the instrument cluster to blink rapidly at this point.<br><br>
  
 
----
 
----
Line 42: Line 43:
 
Group 006<br>
 
Group 006<br>
 
'''[Go!]'''<br>
 
'''[Go!]'''<br>
Activate the Basic Setting.<br>
 
'''[ON/OFF/Next]'''<br>
 
 
The brake pads are now closing.<br>
 
The brake pads are now closing.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
'''[Close Controller, Go Back - 06]'''<br><br>
+
'''[Close Controller, Go Back - 06]'''<br>
 +
The LED in the parking brake switch and the warning lamp in the instrument cluster will probably continue to blink rapidly.  This should stop after cycling the Parking Brake ON, then OFF again.<br><br>
  
 
----
 
----
Line 58: Line 58:
 
Activate the Basic Setting.<br>
 
Activate the Basic Setting.<br>
 
'''[ON/OFF/Next]'''<br>
 
'''[ON/OFF/Next]'''<br>
The brake pads are now opening and closing 3 times.<br>
+
The brake pads will then now opening and close 3 times.<br>
 
'''[Done, Go Back]'''<br>
 
'''[Done, Go Back]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>

Revision as of 23:43, 16 November 2006

Coding

  • 000??xx: Engine
    • 01 = 2.0l TDI (Diesel)
    • 03 = 3.0l TDI (Diesel)
    • 05 = 2.7l TDI (Diesel)
    • 10 = 2.0l TFSI (Gasoline)
    • 20 = 2.4l MPI (Gasoline)
    • 30 = 2.8l FSI (Gasoline)
    • 40 = 3.0l MPI (Gasoline)
    • 50 = 3.2l FSI (Gasoline)
    • 60 = 4.2l MPI (Gasoline)
    • 70 = 4.2l FSI (Gasoline)
  • 000xx?x: Transmission
    • 1 = Manual Transmission
    • 2 = Automatic Transmission (09L/09E)
    • 3 = Multitronic (01J)
  • 000xxx?: Country
    • 1 = Rest of World (RoW)
    • 2 = USA/Canada
    • 3 = Japan

Basic Setting

Open Rear Parking Brake

Cycle the Parking Brake ON, then OFF first.

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 007
[Go!]
The brake pads will then now opening.
[Done, Go Back]
[Close Controller, Go Back - 06]
It is normal for the LED in the parking brake switch and the warning lamp in the instrument cluster to blink rapidly at this point.


Close Rear Parking Brake

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 006
[Go!]
The brake pads are now closing.
[Done, Go Back]
[Close Controller, Go Back - 06]
The LED in the parking brake switch and the warning lamp in the instrument cluster will probably continue to blink rapidly. This should stop after cycling the Parking Brake ON, then OFF again.


Function Test

[Select]
[53 - Parking Brake]
[Basic Settings - 04]
Group 010
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The brake pads will then now opening and close 3 times.
[Done, Go Back]
[Close Controller, Go Back - 06]