Difference between revisions of "Audi A8 (4E) Battery Replacement"

From Ross-Tech Wiki
m
(Replaced content with "__FORCETOC__ The information that was on this page moved to the Battery Replacement page.")
 
(20 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
'''This procedure details how to replace a battery in a vehicle using a separate battery management control module. See the separate instructions for models where the battery management control module is a slave/subsystem of the gateway.'''
 
  
''The following procedure does assume you are using a battery supplied by VW/Audi, all necessary details for the following steps can found on the battery itself. Make sure to refer to the factory repair manual in order to fulfill all additional prerequisites.''
+
The information that was on this page moved to the [[Battery Replacement]] page.
 
 
'''[Select]'''<br>
 
'''[61 - Battery Regulation]'''<br>
 
'''[Coding - 07]'''<br>
 
'''[Battery Coding Assistant]'''<br>
 
* Enter the new Battery Part Number (10 or 11 digits).
 
* Enter the new Battery Serial Number (10 digits).
 
* Select the new Battery Vendor.
 
'''[OK]'''<br>
 
'''[Do it!]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>
 
 
 
Your new Battery should now be coded and the Battery Control Module should be aware of the new Battery.
 

Latest revision as of 14:57, 10 May 2016


The information that was on this page moved to the Battery Replacement page.