Audi A8 (4E) Brake Electronics

From Ross-Tech Wiki
Revision as of 14:37, 8 April 2008 by RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == Login == '''''Note #1''': ''After Login has been carried out you need to recode the control module.''<br> '''''Note #2''': ''The PR codes ( such as 1LJ ) can be found in a...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Login

Note #1: After Login has been carried out you need to recode the control module.
Note #2: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual (Example)

  • 0?xxx: Chassis
    • 5 = Audi A8 (Short Wheel Base)
    • 6 = Audi A8 (Long Wheel Base)
  • 0x?xx: Brakes
    • 1 = 2FNR 42 AL 18" (PR-1LJ)
    • 2 = 2FNR 42 AL 17" (PR-1LL)
    • 4 = FNRG-60 16" (PR-1LG)
    • 7 = Brembo M6 AL 19" (PR-1LW)
  • 0xx?x: Engine
    • 3 = 12 Cyl. Gasoline
    • 5 = 6/8 Cyl. Diesel
    • 6 = 6 Cyl. Diesel (Long Wheel Base)
    • 9 = 6/8 Cyl. Gasoline
  • 0xxx?: Transmission
    • 7 = Automatic (09E/09L)
    • 9 = Multitronic (01J)


Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual (Example)

  • 0?xxx: Chassis
    • 7 = Audi A8 (Long Wheel Base)
    • 8 = Audi A8 (Short Wheel Base)
  • 0x?xx: Brakes
    • 3 = FNRG-60 16" (PR-1LG)
    • 5 = 2FNR 42 AL 17" (PR-1LL)
    • 6 = 2FNR 42 AL 18" (PR-1LJ)
    • 7 = Brembo M6 AL 19" (PR-1LW)
  • 0xx?x: Engine
    • 3 = 12 Cyl. Gasoline
    • 5 = 6/8 Cyl. Diesel
    • 6 = 6 Cyl. Diesel (Long Wheel Base)
    • 9 = 6/8 Cyl. Gasoline
  • 0xxx?: Transmission
    • 7 = Automatic (09E/09L)
    • 9 = Multitronic (01J)


Basic Setting

Steering Angle Sensor (G85) Calibration

[Select]
[03 - ABS Brakes]

[Fault Codes - 02]
[Done, Go Back]

Turn steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Login - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]