Difference between revisions of "Audi CAN Gateway Battery Coding (8T/8K/8R+)"

From Ross-Tech Wiki
(Created page with "__FORCETOC__ '''General Information:''' Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager. In these cases battery management is a slave (subsyste...")
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
  
'''General Information:'''  Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager.  In these cases battery management is a slave (subsystem) under the 19-CAN-Gateway control module. This page covers those 8T/8K/8R and newer models using a CAN Protocol 9-CAN-Gateway control module.<br>
+
'''General Information:'''  Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager.  In these cases battery management is a slave (subsystem) under the 19-CAN-Gateway control module. This page covers those 8T/8K/8R and newer models using a CAN Protocol 19-CAN-Gateway control module.<br>
 
<br>
 
<br>
 
If the vehicle in question uses a diagnostic capable 61-Battery Regulation controller this page ''should'' apply instead:
 
If the vehicle in question uses a diagnostic capable 61-Battery Regulation controller this page ''should'' apply instead:

Revision as of 13:42, 23 January 2015


General Information: Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager. In these cases battery management is a slave (subsystem) under the 19-CAN-Gateway control module. This page covers those 8T/8K/8R and newer models using a CAN Protocol 19-CAN-Gateway control module.

If the vehicle in question uses a diagnostic capable 61-Battery Regulation controller this page should apply instead:



Long Adaptation

Installation of a new battery requires the use of the Long Adaptation function under 19-CAN-Gateway control module. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.


Special Notes