Difference between revisions of "Audi CAN Gateway Battery Coding (8T/8K/8R+)"

From Ross-Tech Wiki
(Replaced content with "__FORCETOC__ The information that was on this page moved to the Battery Replacement page.")
 
(5 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
 
+
The information that was on this page moved to the [[Battery Replacement]] page.
'''General Information:'''  Most 2009+ Audi A4 and newer models do NOT use a separate 61-Battery Manager.  In these cases battery management is a slave (subsystem) under the 19-CAN-Gateway control module. This page covers those 8T/8K/8R and newer models using a CAN Protocol 19-CAN-Gateway control module.<br>
 
<br>
 
If the vehicle in question uses a diagnostic capable 61-Battery Regulation controller this page ''should'' apply instead:
 
* [[Audi A8 (4E) Battery Replacement|61-Battery Regulation]]<br>
 
<br>
 
----
 
 
 
=== Long Adaptation ===
 
 
 
Installation of a new battery requires the use of the [http://www.ross-tech.com/vcds/tour/adaptation_screen.html#long Long Adaptation] function under 19-CAN-Gateway control module. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.
 
 
 
 
 
=== Special Notes ===
 
 
 
 
 
 
 
 
 
 
 
[[Category:Subsystems]]
 

Latest revision as of 14:56, 10 May 2016

The information that was on this page moved to the Battery Replacement page.