Difference between revisions of "B10A9"

From Ross-Tech Wiki
(Created page with "__FORCETOC__ == B10A9 - Control Circuit for A/C Compressor == ==== Special Notes ==== * When found in the (4H) Audi A8 chassis 08-Auto HVAC control module, check the N280 AC...")
 
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
 
== B10A9 - Control Circuit for A/C Compressor ==
 
== B10A9 - Control Circuit for A/C Compressor ==
 +
 +
=== B10A911 - Control Circuit A/C Compressor: Short to Ground ===
 +
 +
==== Possible Symptoms ====
 +
 +
* Climate Control not working (Not cooling)
 +
 +
==== Possible Causes ====
 +
 +
* Fuse(s) faulty
 +
* Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280) faulty
 +
* Compressor Regulating Valve (N280) faulty
 +
* Heating/Climate Control Module (J301) faulty
 +
 +
==== Possible Solutions ====
 +
 +
* Check Fuse(s)
 +
* Check Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280)
 +
* Check/Replace Compressor Regulating Valve (N280)
 +
** Check Measuring Value Blocks (MVB)
 +
** Perform Output Test
 +
* Check/Replace Heating/Climate Control Module (J301)
 +
 +
 +
 +
=== B10A915 - Control Circuit A/C Compressor: Open or Short to Plus ===
 +
 +
==== Possible Symptoms ====
 +
 +
* Climate Control not working (Not cooling)
 +
 +
==== Possible Causes ====
 +
 +
* Fuse(s) faulty
 +
* Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280) faulty
 +
* Compressor Regulating Valve (N280) faulty
 +
* Heating/Climate Control Module (J301) faulty
 +
 +
==== Possible Solutions ====
 +
 +
* Check Fuse(s)
 +
* Check Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280)
 +
* Check/Replace Compressor Regulating Valve (N280)
 +
** Check Measuring Value Blocks (MVB)
 +
** Perform Output Test
 +
* Check/Replace Heating/Climate Control Module (J301)
 +
 +
 +
  
 
==== Special Notes ====
 
==== Special Notes ====
 +
 +
* The Refrigerant Compressor may need to be replaced if the Compressor Regulating Valve (N280) is not available separately.
  
 
* When found in the (4H) Audi A8 chassis 08-Auto HVAC control module, check the N280 AC compressor wiring to/from J519 per the factory level [[Official Factory Repair Information |Wiring Diagram]].
 
* When found in the (4H) Audi A8 chassis 08-Auto HVAC control module, check the N280 AC compressor wiring to/from J519 per the factory level [[Official Factory Repair Information |Wiring Diagram]].

Revision as of 10:54, 12 September 2019

B10A9 - Control Circuit for A/C Compressor

B10A911 - Control Circuit A/C Compressor: Short to Ground

Possible Symptoms

  • Climate Control not working (Not cooling)

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280) faulty
  • Compressor Regulating Valve (N280) faulty
  • Heating/Climate Control Module (J301) faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280)
  • Check/Replace Compressor Regulating Valve (N280)
    • Check Measuring Value Blocks (MVB)
    • Perform Output Test
  • Check/Replace Heating/Climate Control Module (J301)


B10A915 - Control Circuit A/C Compressor: Open or Short to Plus

Possible Symptoms

  • Climate Control not working (Not cooling)

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280) faulty
  • Compressor Regulating Valve (N280) faulty
  • Heating/Climate Control Module (J301) faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Compressor Regulating Valve (N280)
  • Check/Replace Compressor Regulating Valve (N280)
    • Check Measuring Value Blocks (MVB)
    • Perform Output Test
  • Check/Replace Heating/Climate Control Module (J301)



Special Notes

  • The Refrigerant Compressor may need to be replaced if the Compressor Regulating Valve (N280) is not available separately.
  • When found in the (4H) Audi A8 chassis 08-Auto HVAC control module, check the N280 AC compressor wiring to/from J519 per the factory level Wiring Diagram.
    • If coolant or water migration damaged the wiring harnesses you may find this DTC in conjunction with 01232, B10A9 or B10C6.
    • The following pages contains a photos from a (4H) 4.2L A8L with corrosion damaged 4H A8L 14b pin connector: