Bentley Continental (3W) Automatic Roof

From Ross-Tech Wiki
Revision as of 13:02, 12 April 2018 by Peter (talk | contribs)

Additional information can be found in the Official Factory Repair Information.


Adaptation

Prerequisites: End Stops

  • Vehicle system voltage above 12.0v (Engine running)
  • All doors and lids shut
  • No faults in the 26-Automatic Roof controller
  • Convertible Top in good condition, no damage
  • Convertible Top Closed and locked


Channel 00: Delete End Stops

To reset the learned End Stops, save a new value of 0

  • Then follow with the Relearn End Stops.


Channel 01: Relearn End Stops

To start the relearn the End Stops, save a new value of 1

  • Open the Convertible Top to 'Relearn' the End Stops.
  • Check for and clear any fault codes.
  • Check for proper Convertible Top Operation