Difference between revisions of "Bentley Continental (3W) Brake Electronics (Bosch 5.7)"

From Ross-Tech Wiki
m
 
(4 intermediate revisions by 2 users not shown)
Line 14: Line 14:
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
 +
'''''Note #3''': In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.''<br>
  
 
* 0006878 = Bentley Continental Flying Spur (3W2/BY611)
 
* 0006878 = Bentley Continental Flying Spur (3W2/BY611)
 
* 0007878 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
 
* 0007878 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
 
* 0007678 = Bentley Continental GT Diamond Series (3W3/BY614)
 
* 0007678 = Bentley Continental GT Diamond Series (3W3/BY614)
 
 
  
 
== Basic Setting ==
 
== Basic Setting ==
Line 26: Line 25:
  
 
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br>
 
Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.<br>
 +
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).<br>
 +
  
 +
'''[Meas. Blocks - 08]'''<br>
 
'''[Meas. Blocks - 08]'''<br>
 
'''[Meas. Blocks - 08]'''<br>
 
Group 005 Field 1 (Steering Angle Sensor -G85-)<br>
 
Group 005 Field 1 (Steering Angle Sensor -G85-)<br>
Line 47: Line 49:
  
 
'''[Close Controller, Go Back - 06]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>
 +
 +
== Video Link ==
 +
=== Bosch 5.3 and 5.7 ABS with ESP, Coding ===
 +
 +
[[File:Titlescreen.jpg|200px|link=http://www.youtube.com/watch?v=G7YRiVYrLjo]]
 +
 +
http://www.youtube.com/watch?v=G7YRiVYrLjo

Latest revision as of 10:54, 20 July 2022

Coding II

Note #1: After the Coding-2 (Login) has been carried out you need to Recode the control module then perform the Steering Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.

  • 03121 = Bentley Continental Flying Spur (3W2/BY611)
  • 02121 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
  • 02321 = Bentley Continental GT Diamond Series (3W3/BY614)


Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.

  • 0006878 = Bentley Continental Flying Spur (3W2/BY611)
  • 0007878 = Bentley Continental GT/Cabrio (3W3/BY614 - 3W4/BY615)
  • 0007678 = Bentley Continental GT Diamond Series (3W3/BY614)

Basic Setting

Steering Angle Sensor (G85) Calibration

Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.
Verify the steering wheel is centered by moving the vehicle moving straight ahead (less than 20KMH/15MPH).


[Meas. Blocks - 08]
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Coding II - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]

Video Link

Bosch 5.3 and 5.7 ABS with ESP, Coding

Titlescreen.jpg

http://www.youtube.com/watch?v=G7YRiVYrLjo