Bentley Continental (3W) Brake Electronics (Bosch 5.7)

From Ross-Tech Wiki
Revision as of 19:53, 8 May 2008 by RtWiKiSyS0p (talk | contribs) (New page: __FORCETOC__ == Login == '''''Note''': ''After Login has been carried out you need to recode the control module.''<br> 03121 = Bentley Continental Flying Spur (3W - BY611) 02121 = Bentle...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Login

Note: After Login has been carried out you need to recode the control module.

03121 = Bentley Continental Flying Spur (3W - BY611) 02121 = Bentley Continental GT/Cabrio (3W - BY614/BY615)


Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.

06878 = Bentley Continental Flying Spur (3W - BY611) 07878 = Bentley Continental GT/Cabrio (3W - BY614/BY615)


Basic Setting

Steering Angle Sensor (G85) Calibration

[Select]
[03 - ABS Brakes]

[Fault Codes - 02]
[Done, Go Back]

Turn steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±2.5 °
[Done, Go Back]

[Login - 11]
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Bentley_Continental_(3W)_Brake_Electronics_(Bosch_5.7)&oldid=4478"