C10E2

From Ross-Tech Wiki
Revision as of 18:15, 29 July 2022 by Peter (talk | contribs)

C10E2 01 - Control Module for Electronic Parking Brake: Electrical Failure

Possible Symptoms

  • Flashing LED on Parking Brake Switch
  • Parking Brake warning message in instrument cluster
  • Parking Brake fails to operate

Possible Causes

  • Faulty Wiring or Connections
  • Faulty Automatic parking brake Motor
  • Low battery voltage (may cause component damage)

Possible Solutions

  • Check/repair electrical wiring or connections
  • Replace faulty Automatic parking brake Motor

Special Notes

  • When found with the "Extended UDS fault details" [Steuergerät EPB - H-Brückenfehler] / [EPB Control Module - H-Bridge Error] see post #52 in this thread


C10E2 54 - Control Module for Electronic Parking Brake: Missing Calibration / Basic Setting

Special Notes

  • When found in the 03-ABS Brake module on MQB (Mk7 chassis) vehicles with an Electro-Mechanical Parking Brake (EPB) see post #8 in this thread