Difference between revisions of "Common Procedures"

From Ross-Tech Wiki
Line 13: Line 13:
  
 
* Working on the Electro-Mechanical Parking Brake (EPB)
 
* Working on the Electro-Mechanical Parking Brake (EPB)
* Suspension Level Control Calibration
+
* [http://www.ross-tech.com/vag-com/cars/levelcontrol.html Suspension Level Control Calibration] ''Ross-Tech site''
 
* Some ABS/ESP controllers will lose their Coding after problems such as steering angle sensor issues. Perform procedures on the applicable vehicle-specific pages in the Diagnostic Procedures section.
 
* Some ABS/ESP controllers will lose their Coding after problems such as steering angle sensor issues. Perform procedures on the applicable vehicle-specific pages in the Diagnostic Procedures section.
  
Line 21: Line 21:
 
* Quiescent Current Analysis using the Battery Management on Audi A6 (4F), Audi A8 (4E) and Audi Q7 (4L)
 
* Quiescent Current Analysis using the Battery Management on Audi A6 (4F), Audi A8 (4E) and Audi Q7 (4L)
 
* [[SRI Reset Procedure]]
 
* [[SRI Reset Procedure]]
* VW Airbag module Coding
+
* [http://www.ross-tech.com/vag-com/cars/airbag-coding.html  VW Airbag module Coding] ''Ross-Tech site''

Revision as of 09:39, 27 July 2011

This Section contains Procedures commonly used and not specific for a certain Model. Please not that there may still be specifics to each Model that need to be obeyed even though the Procedures themselves are generic.

Engine & Transmission


Brakes & Chassis

  • Working on the Electro-Mechanical Parking Brake (EPB)
  • Suspension Level Control Calibration Ross-Tech site
  • Some ABS/ESP controllers will lose their Coding after problems such as steering angle sensor issues. Perform procedures on the applicable vehicle-specific pages in the Diagnostic Procedures section.

Misc

  • Coding Control Modules based on Production Codes
  • Quiescent Current Analysis using the Battery Management on Audi A6 (4F), Audi A8 (4E) and Audi Q7 (4L)
  • SRI Reset Procedure
  • VW Airbag module Coding Ross-Tech site