Difference between revisions of "Common Procedures"

From Ross-Tech Wiki
Line 9: Line 9:
 
* [[Throttle Body Alignment (TBA)]]
 
* [[Throttle Body Alignment (TBA)]]
 
* [[Automatic Transmission Basic Settings]]  
 
* [[Automatic Transmission Basic Settings]]  
** Some Transmission control modules support a Kick-Down procedure and others do Not. Check the procedures on the applicable vehicle-specific pages in the Diagnostic Procedures section or the repair  manual for additional information. Generalized procedure can be found here [http://www.ross-tech.com/vag-com/cars/autotrans.html  Automatic Transmission Info]''Ross-Tech site''
+
 
  
 
== Brakes & Chassis ==
 
== Brakes & Chassis ==

Revision as of 11:31, 4 August 2011

This Section contains Procedures commonly used and not specific for a certain Model. Please not that there may still be specifics to each Model that need to be obeyed even though the Procedures themselves are generic.

Engine & Transmission


Brakes & Chassis

  • Working on the Electro-Mechanical Parking Brake (EPB)
  • Suspension Level Control Calibration Ross-Tech site
  • Some ABS/ESP controllers will lose their Coding after problems such as steering angle sensor issues. Perform procedures on the applicable vehicle-specific pages in the Diagnostic Procedures section.

Misc

  • Coding Control Modules based on Production Codes
  • Quiescent Current Analysis using the Battery Management on Audi A6 (4F), Audi A8 (4E) and Audi Q7 (4L)
  • SRI Reset Procedure
  • VW Airbag module Coding Ross-Tech site