Control Module Maps

From Ross-Tech Wiki
Revision as of 19:03, 11 October 2009 by RtWiKiSyS0p (talk | contribs)

What is a Control Module Map?

Since version 505.1 the VAG-COM Diagnostic System supports "Control Module Maps", this function rapidly scans through all 255 possible measuring block groups and/or adaptation channels on any ECU and writes a "map" file. These "map" files are useful for creating new label files or taking a "snapshot" of all available data from an ECU.

  • *.PLA files are Adaptation Maps.
  • *.PLB files are Meas. Block Maps

VCDS Manual: Control Module Maps


How can I help?

We are continuosly working on improving this wiki and the VC label files, therefore it's very helpful to have maps from modules which are either new, undocumented or incomplete yet. You can help us by providing such maps from your car(s). After creating the "map" files, you can find them in the /VAG-COM/Logs/ folder - please send them to us via email. If you are sending files, please attach an Auto-Scan from the car(s) you obtained the maps from too.

To create a map from all undocumented control modules in the car, please perform the following procedure:

[Options]
Debug Level: 2
[Apply]
[Auto-Scan]
Select Chassis Type
[Start]

To create map files from individual control modules, please perform the following procedure:

[Applications]
[Controller Channels Map]
Address: XX (Enter the address of the control module in question, e.g. 01 for engine)
Function: Meas. Blocks/Adaptation
Output: Pre-Label File
[Start]


How do I find out if the control modules in my car are documented?

Start VC and perform a standard Auto-Scan:

[Auto-Scan]
Select your model.
[Start]

After the Auto-Scan is finished, you will see outputs like this:

Address 01: Engine       Labels: 06A-906-033-BGU.LBL
  Part No: 06A 906 033 CM
  Component: SIMOS71 1.6l 2VG    6395
  Coding: 0000075
  Shop #: WSC 12345

OR

Address 76: Park Assist       Labels: None
  Part No: 1Z0 919 283 B
  Component: Parkhilfe 4-Kan H04 0020
  Coding: 0001001
  Shop #: WSC 12345

Everytime when you see Labels: None, there is no Label File for this control module.


Are there special modules you want data from?

Besides data from undocumented modules, we are especially looking for maps from these models/modules:

  • Audi A3 (8P)
    • Pre-Label File: Meas. Blocks (PLB)
      • 42 (w/o Index, Index J)
      • 52 (w/o Index, Index J)
    • Pre-Label File: Adaptation (PLA)
      • 10
  • Audi A4 (8K)
    • Pre-Label File: Adaptation (PLA)
      • 1B
      • 47 (Basis)
      • 56 (Radio Chorus III)
    • Pre-Label File: Meas. Blocks (PLB)
      • 1B
      • 47 (Basis)
      • 56 (Radio Chorus III)
  • Audi A5 (8T)
    • Pre-Label File: Adaptation (PLA)
      • 1B
      • 47 (Basis)
      • 56 (Radio Chorus III)
    • Pre-Label File: Meas. Blocks (PLB)
      • 1B
      • 47 (Basis)
      • 56 (Radio Chorus III)
  • Audi A6 (4F)
    • Pre-Label File: Adaptation (PLA)
      • 65 (High)
    • Pre-Label File: Meas. Blocks (PLB)
      • 65 (High)
  • Audi A6 allroad (4FH)
    • Pre-Label File: Adaptation (PLA)
      • 65 (High)
    • Pre-Label File: Meas. Blocks (PLB)
      • 65 (High)
  • Audi A8 (4E)
    • Pre-Label File: Meas. Blocks (PLB)
  • Audi Q7 (4L)
    • Pre-Label File: Adaptation (PLA)
      • 07 (MMI Low/Basic)
      • 17 (MY 2009+)
      • 37 (integrated in MMI)
      • 65 (High)
    • Pre-Label File: Meas. Blocks (PLB)
      • 07 (MMI Low/Basic)
      • 37 (integrated in MMI)
      • 65 (High)
  • Audi R8 (42)
    • Pre-Label File: Meas. Blocks (PLB)
      • 14
    • Pre-Label File: Adaptation (PLA)
      • 03
      • 08
      • 14
      • 15
      • 65
  • VW EOS (1F)
    • Pre-Label File: Meas. Blocks (PLB)
      • 47
  • VW Pheaton Facelift (3D)
    • Pre-Label File: Meas. Blocks (PLB)
      • 17
    • Pre-Label File: Adaptation (PLA)
      • 17
  • VW Touareg Facelift (7L6)
    • Pre-Label File: Meas. Blocks (PLB)
      • 17
    • Pre-Label File: Adaptation (PLA)
      • 17