Cruise Control Retrofitting (1K)
From Ross-Tech Wiki
Revision as of 12:59, 26 May 2010 by RtWiKiSyS0p (talk | contribs)
Requirements
Steering Column Control Module
There are different types of steering column control modules, the type is depending on several individual options so we have compiled a list of available part numbers for you. If a part number is not listed, registered VCDS users may contact us to ask for help with this topic.
Installation & Wiring
In general the whole retrofit is just plug and play except that one wire may need to be added.
- Wire T20d/13 from steering column control module to engine control module (see wiring diagram specific your particular car/engine).
- Install Cruise Control capable Lever (see Parts Catalog/Repair Manual for details).
Activating Cruise Control
- Change Steering Column Control Module Coding.
- Activate Cruise Control in the Engine Control Module.
- See Engine specific Diagnostic Procedures, depending on the Engine Control Module either Coding or Coding-II can be used.