Difference between revisions of "ESP System Function Test (Conti/Teves)"

From Ross-Tech Wiki
m (ESP System Function Test moved to ESP System Function Test (Conti/Teves))
(Redirected page to ESP System Function Test)
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
== ESP System Function Test ==
+
#REDIRECT [[ESP System Function Test]]
 
 
=== Notes ===
 
 
 
* The ESP road test serves to check the plausibility of the signals from the lateral acceleration sender, rotation rate sender and pressure sender.
 
* It should always be carried out after removing or replacing any parts of the ESP system.
 
 
 
* '''It is not possible to cancel the ESP road test after it has been started. The complete test procedure must be performed.'''
 
 
 
=== Pre-Conditions ===
 
 
 
* ABS Warning Light (K47) ON and ASR Indicator Light (K155) OFF.
 
* Engine RUNNING.
 
* Vehicle standing.
 
 
 
=== Instructions ===
 
 
 
* Press brake pedal firmly until the ASR Indicator Light (K155) goes ON. A brake pressure of at least 35 bar needs to be reached for this.
 
* Start road test (Do this on an enclosed site or make sure to drive according to traffic regulations).
 
* Make a right turn, then a left turn (or vice versa). A rotation rate (turn rate) of ~10 °/s must be reached while driving these turns.
 
* The ABS Warning Light (K47) should now went OFF.
 
 
 
* ''A common example for turns like this is driving turns with a radius of 10 to 12 meters with a speed of 15 to 30 km/h.''
 
* ''The ABS, EDS, ASR and ESP functions may NOT get activated during these test.''
 
* ''Doing other maneuvers between the turns will have no influence on the ESP System Function Test.''
 

Latest revision as of 17:02, 13 July 2011