ESP System Function Test (Conti/Teves)

From Ross-Tech Wiki
Revision as of 13:05, 26 May 2006 by RtWiKiSyS0p (talk | contribs) (ESP System Function Test moved to ESP System Function Test (Conti/Teves))

ESP System Function Test

Notes

  • The ESP road test serves to check the plausibility of the signals from the lateral acceleration sender, rotation rate sender and pressure sender.
  • It should always be carried out after removing or replacing any parts of the ESP system.
  • It is not possible to cancel the ESP road test after it has been started. The complete test procedure must be performed.

Pre-Conditions

  • ABS Warning Light (K47) ON and ASR Indicator Light (K155) OFF.
  • Engine RUNNING.
  • Vehicle standing.

Instructions

  • Press brake pedal firmly until the ASR Indicator Light (K155) goes ON. A brake pressure of at least 35 bar needs to be reached for this.
  • Start road test (Do this on an enclosed site or make sure to drive according to traffic regulations).
  • Make a right turn, then a left turn (or vice versa). A rotation rate (turn rate) of ~10 °/s must be reached while driving these turns.
  • The ABS Warning Light (K47) should now went OFF.
  • A common example for turns like this is driving turns with a radius of 10 to 12 meters with a speed of 15 to 30 km/h.
  • The ABS, EDS, ASR and ESP functions may NOT get activated during these test.
  • Doing other maneuvers between the turns will have no influence on the ESP System Function Test.