View source for Exhaust Gas Recirculation (EGR) Valve Adaptation

From Ross-Tech Wiki

← Exhaust Gas Recirculation (EGR) Valve Adaptation

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

__FORCETOC__ == Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR) == '''<u>Prerequisites (General):</u>'''<br> * Ignition ON * Engine OFF * Battery voltage at least 11.5 V * For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C '''[Select]'''<br> '''[01 - Engine]'''<br> '''[Meas. Blocks - 08]'''<br> Select Group 074.<br> '''[Go!]'''<br> MVB 074.1: Min Position in Volts<br> MVB 074.2: Max Position in Volts<br> MVB 074.3: Potentiometer voltage<br> MVB 074.4: Adaption status: (Run/OK/etc) <br> '''[Switch to Basic Settings]'''<br> MVB 074.4: Adaption status: (Run) then it should change to (ADP OK)<br> '''[Switch to Measuring Blocks]'''<br> '''[Close Controller, Go Back - 06]'''<br><br>

Return to Exhaust Gas Recirculation (EGR) Valve Adaptation.