Exhaust Gas Recirculation (EGR) Valve Adaptation

From Ross-Tech Wiki
Revision as of 10:42, 7 September 2007 by Andy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Most VW/Audi/Seat/Skoda gasoline engines with Exhaust Gas Recirculation (EGR)

Prerequisites (General):

  • Ignition ON
  • Engine OFF
  • Battery voltage at least 11.5 V
  • For ECU's using ME 7.5, the coolant temp needs to be between 10 and 50 °C

[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Group 074.
[Go!]
MVB 074.1: Min Position in Volts
MVB 074.2: Max Position in Volts
MVB 074.3: Potentiometer voltage
MVB 074.4: Adaption status: (Run/OK/etc)
[Switch to Basic Settings]
MVB 074.4: Adaption status: (Run) then it should change to (ADP OK)
[Switch to Measuring Blocks]
[Close Controller, Go Back - 06]