Difference between revisions of "Immobilizer III Injection Pump Swapping"

From Ross-Tech Wiki
m
Line 37: Line 37:
  
 
'''[Login - 11]'''<br>
 
'''[Login - 11]'''<br>
''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''<br>
 
 
* '''4-digit PIN'''
 
* '''4-digit PIN'''
 
** The PIN needs to be entered as 5-digit number. ''For example, if your PIN is 1234, enter 01234.''
 
** The PIN needs to be entered as 5-digit number. ''For example, if your PIN is 1234, enter 01234.''
* '''7-digit PIN'''
 
** '''[Use 7-digit PIN/SKC]'''
 
** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
 
** '''[OK]'''
 
** VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
 
 
'''[Do it!]'''<br>
 
'''[Do it!]'''<br>
  

Revision as of 17:38, 12 July 2012

This procedure details how to change the Injection Pump on 2.5l V6 TDI Engine in VW/Audi/Seat/Skoda vehicles with Immobilizer III.

Determining VIN & IMMO-ID

Engine Control Unit (ECU)

[Select]
[01 - Engine]
Look at the first "Extra" field. The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.
[Close Controller, Go Back - 06]

---OR---

[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Block 081.
[Go!]
The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID..
[Done, Go Back]
[Close Controller, Go Back - 06]


Injection Pump Swapping

Prerequisites:

  • The NEW Injection Pump is installed in the car.
  • Battery voltage at least 12.5 V.
  • Make sure to have the Immobilizer PIN, for the Engine Control Unit (ECU).


[Select]
[01 - Engine]


[Login - 11]

  • 4-digit PIN
    • The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.

[Do it!]


[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
There are 2 possibilities how to enter a PIN, choose the one that applies for you.

  • 4-digit PIN
    • The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
  • 7-digit PIN
    • [Use 7-digit PIN/SKC]
    • Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
    • [OK]
    • VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".

[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]


  • Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.
  • Start the Engine to verify the adaptation was successful.