Difference between revisions of "Immobilizer III Key Matching (Cluster)"

From Ross-Tech Wiki
 
Line 1: Line 1:
 +
__FORCETOC__
 +
This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with Immobilizer III.
  
 +
== Determining IMMO-ID & VIN ==
  
−
    This procedure details how to match new keys to Immobilizer-equipped VW/Audi vehicles with Immobilizer III (2002+ Golf. Jetta, New Beetle, Passat). As of 11 Mar. 2002, VW and Audi are providing 7-digit Secret Key Codes in place of the earlier 4-digit SKC's. Keys must be coded using the new 7-digit SKC (secret key code) method unless the owner still has the correct 4-digit code.
+
Access 17-Instruments (or separate 25-Immobilizer on vehicles that are set up that way) and look at the first "Extra" field.
  
−
    Immo-3 knows your car's VIN. Access 17-Instruments (or separate 25-Immobilizer on vehicles that are set up that way) and look at the first "Extra" field.
+
If you see something like: "Immo-ID VWZ7Z0W0648696"  You've got Immo-2 (or maybe even Immo-1 in earlier non-US models).
  
−
    If you see something like: "Immo-ID VWZ7Z0W0648696" You've got Immo-2 (or maybe even Immo-1 in earlier non-US models).
+
If you see something like "WVZKB58001H231169 VWZ7Z0W0648696" You've got
 +
Immo-3. The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.
  
−
    If you see something like "WVZKB58001H231169 VWZ7Z0W0648696" You've got
+
---OR---
−
    Immo-3. The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.
 
  
−
    Note: See this page for important SKC information.
+
'''[Select]'''<br>
 +
'''[25 - Immobilizer]'''<br>
 +
'''[Meas. Blocks - 08]'''<br>
 +
Select Block 081.<br>
 +
'''[Go!]'''<br>
 +
''The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.''.<br>
 +
'''[Done, Go Back]'''<br>
 +
'''[Close Controller, Go Back - 06]'''<br>
  
  
−
Procedure for matching keys to vehicles with Immobilizer III in the Instrument Cluster:
+
== Key Matching ==
  
−
  1.
+
'''<u>Prerequisites:</u>'''<br>
 +
* All keys are either new or were adapted to this car (IMMO-ID) before.<br>
 +
* You can match up to 8 keys.
 +
* While adapting each key, make sure to place the other keys away from the ignition lock (reader coil). ''The passenger seat is an adequate place.''
 +
* Battery voltage at least 12.0 V.<br>
  
−
      [Select]
 
−
      [17 - Instruments]
 
−
      Write down the 14 digit Immobilizer ID number from the "Extra" field
 
−
     
 
−
  2.
 
  
−
      Take that ID number to your dealer and request your seven-digit SKC, along with the workshop code and importer number (all this information can be found in the upper-right corner of the Administration screen of the dealer's VAS 5051). Additional information about how to find the WSC and Importer Number can be found here.
+
'''[Select]'''<br>
−
     
+
'''[25 - Immobilizer]'''<br>
−
  3.
+
'''[Meas. Blocks - 08]'''<br>
 +
Select Block 002.<br>
 +
'''[Go!]'''<br>
 +
''The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.''<br>
 +
''You can check each key in this manner.''
  
−
      Measure the car's battery voltage, it must be 12.5 V or higher.
 
−
     
 
−
  4.
 
  
−
      You can check to make sure a key has the correct electronics in it so that it can be matched to the Immobilizer by:
+
Select Block 003.<br>
−
      [Select]
+
'''[Go!]'''<br>
−
      [17 - Instruments]
+
''Make sure the shown lock times in field 1, 2 and 3 are '''0''' (each field represents a time in minutes).''<br>
−
      [Meas. Blocks - 08]
+
* ''If the lock times are NOT '''0''':''
−
      Group 022
+
** ''Do NOT switch off the ignition!''
−
      [Go!]
+
** ''Allow the car to sit for AT LEAST the number of minutes that were indicated by the fields 1-3.''
−
      The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer. You can check each key in this manner.
+
'''[Done, Go Back]'''<br>
−
     
 
−
  5.
 
  
−
      [Select]
 
−
      [17 - Instruments]
 
−
      [Meas. Blocks - 08]
 
−
      Group 024
 
−
      [Go!]
 
−
      Any numbers displayed in fields 1-4 represent the time in minutes that must be counted down before the Immobilizer is unlocked. If the fields are all zero, skip to step 6. If the Immobilizer is locked:
 
−
      [Done, Go Back]
 
−
      [Close Controller, Go Back - 06]
 
−
      Do not switch off the ignition! Allow the car to sit for AT LEAST the number of minutes that were indicated by the display in Group 024
 
−
     
 
−
  6.
 
  
−
      [Select]  
+
'''[Security Access - 16]'''<br>
−
      [17 - Instruments]
+
''There are 2 possibilities how to enter a PIN, choose the one that applies for you.''
−
      [Meas. Blocks - 08]
+
* '''4-digit PIN'''
−
      Group 024
+
** Enter zero followed by the 4-digit PIN. ''For example, if your PIN is 1234, enter 01234.''
−
      [Go!]
+
* '''7-digit PIN'''
−
      Make sure all fields are zero.
+
** '''[Use 7-digit PIN/SKC]'''
−
      [Done, Go Back]
+
** Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
−
     
+
** '''[OK]'''
−
  7.
+
** VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
 +
'''[Do it!]'''<br>
  
−
      [Login - 11]
 
−
      [Use 7-digit PIN/SKC]
 
−
      Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
 
−
      [OK]
 
−
     
 
−
  8.
 
  
−
      VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".
+
'''[Adaptation - 10]'''<br>
−
      [Do It!]
+
Enter 001 in "Channel Number".<br>
−
     
+
'''[Read]'''<br>
−
  9.
+
''The "Stored Value" is the number of keys currently matched.''<br>
 +
Enter a "new value" corresponding to the total number of keys to be matched, including any existing keys.<br>
 +
''The old keys are automatically beeing cleared.''<br>
 +
'''[Save]'''<br>
 +
'''[Done, Go Back]'''
 +
'''[Close Controller, Go Back - 06]'''
  
−
      [Adaptation - 10]
 
−
      Enter 21 in "Channel Number"
 
−
      [Read]
 
−
      The "Stored Value" is the number of keys currently matched.
 
−
      Enter "new value" of 0
 
−
      [Save]
 
−
      This clears out the old key-matchings.
 
−
      Enter a "new value" corresponding to the total number of keys to be matched,  including any existing keys
 
−
      [Save]
 
−
     
 
−
  10.
 
  
−
      [Done, Go Back]
+
* ''Repeat the following steps until all keys have been matched:''<br>
−
      [Close Controller, Go Back - 06]
+
**''Switch ignition off and remove key.''<br>
−
      Switch ignition off and remove key
+
**''Insert next key to ignition and switch ignition on again.''<br>
−
     
+
**''The warning light for the Immobilizer will light up for ~2 seconds, then go out Switch ignition off and remove key.''<br>
−
  11.
 
  
−
      Insert next key to ignition and switch ignition on again
+
'''Note:''' ''The above steps after saving the adaptation, should not exceed 60 seconds!''
−
      The warning light for the Immobilizer will light up for ~2 seconds, then go out
 
−
      Switch ignition off and remove key
 
−
     
 
−
  12.
 
−
 
 
−
      Repeat step 11 with each key until all keys have been matched.
 

Revision as of 11:22, 5 April 2006

This procedure details how to match new keys to VW/Audi/Seat/Skoda vehicles with Immobilizer III.

Determining IMMO-ID & VIN

Access 17-Instruments (or separate 25-Immobilizer on vehicles that are set up that way) and look at the first "Extra" field.

If you see something like: "Immo-ID VWZ7Z0W0648696" You've got Immo-2 (or maybe even Immo-1 in earlier non-US models).

If you see something like "WVZKB58001H231169 VWZ7Z0W0648696" You've got Immo-3. The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.

---OR---

[Select]
[25 - Immobilizer]
[Meas. Blocks - 08]
Select Block 081.
[Go!]
The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID..
[Done, Go Back]
[Close Controller, Go Back - 06]


Key Matching

Prerequisites:

  • All keys are either new or were adapted to this car (IMMO-ID) before.
  • You can match up to 8 keys.
  • While adapting each key, make sure to place the other keys away from the ignition lock (reader coil). The passenger seat is an adequate place.
  • Battery voltage at least 12.0 V.


[Select]
[25 - Immobilizer]
[Meas. Blocks - 08]
Select Block 002.
[Go!]
The value in field 3 must be 1. If value is not 1, the key is not capable of being adapted to Immobilizer.
You can check each key in this manner.


Select Block 003.
[Go!]
Make sure the shown lock times in field 1, 2 and 3 are 0 (each field represents a time in minutes).

  • If the lock times are NOT 0:
    • Do NOT switch off the ignition!
    • Allow the car to sit for AT LEAST the number of minutes that were indicated by the fields 1-3.

[Done, Go Back]


[Security Access - 16]
There are 2 possibilities how to enter a PIN, choose the one that applies for you.

  • 4-digit PIN
    • Enter zero followed by the 4-digit PIN. For example, if your PIN is 1234, enter 01234.
  • 7-digit PIN
    • [Use 7-digit PIN/SKC]
    • Enter the 7-digit PIN, Date on which the PIN was generated by the dealer, along with the Workshop Code (WSC) and the Importer number of the dealer that generated the code.
    • [OK]
    • VAG-COM will validate the data you have entered and return you to the Login screen, where the Login Code will show as "XXXXX".

[Do it!]


[Adaptation - 10]
Enter 001 in "Channel Number".
[Read]
The "Stored Value" is the number of keys currently matched.
Enter a "new value" corresponding to the total number of keys to be matched, including any existing keys.
The old keys are automatically beeing cleared.
[Save]
[Done, Go Back] [Close Controller, Go Back - 06]


  • Repeat the following steps until all keys have been matched:
    • Switch ignition off and remove key.
    • Insert next key to ignition and switch ignition on again.
    • The warning light for the Immobilizer will light up for ~2 seconds, then go out Switch ignition off and remove key.

Note: The above steps after saving the adaptation, should not exceed 60 seconds!

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Immobilizer_III_Key_Matching_(Cluster)&oldid=1765"