MLB based Cent. Elect. (J519) BCM1

From Ross-Tech Wiki
Revision as of 12:33, 14 July 2020 by Dana (talk | contribs) (Created page with "__FORCETOC__ This page applies to Address '''09-Cent. Elect.''' in MLB based models such as the VW '''Touareg''' (7P/BP) and Audi '''A4''' ''(8K)'', '''A5''' ''(8T)'', '''Q5''...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page applies to Address 09-Cent. Elect. in MLB based models such as the VW Touareg (7P/BP) and Audi A4 (8K), A5 (8T), Q5 (8R) in addition to the A6/A7/A8 (4G/4H) models with J393 Component: BCM1 1.0 and BCM1 2.0. This page does NOT apply to MLBevo models using Component BCM1 MLBevo.

There were several revisions over the years but the installed BCM1 can be identified by evaluating the data in the Auto-Scan:

Address 09: Cent. Elect. (J519)       Labels: 8K0-907-063.clb
   Part No SW: 8K0 907 063 DH    HW: 8K0 907 063 DH
   Component: BCM1 1.0      H16 0103  
Address 09: Cent. Elect. (J519)       Labels: 4H0-907-063-V1.clb
   Part No SW: 4H0 907 063 BG    HW: 4H0 907 063 
   Component: BCM1 2.0      H12 0100  
Address 09: Cent. Elect. (J519)       Labels: 4H0-907-063-V2
   Part No SW: 4H0 907 063 DA    HW: 4H0 907 063 AA
   Component: BCM1 2.0      H20 0311 

Coding

Coding information is available while connected to the vehicle with VCDS using the Long Coding Helper. It is strongly recommended to save a complete Auto-Scan prior to any coding modification.

Adaptation

Documented Adaptation channels are available in the form of a drop-down menu when connected to the vehicle with VCDS.

Security access

Security access codes will appear in the form of a pop-up balloon.

  • It is strongly recommended to create Adaptation function Control Module Maps prior to any modifications that require a Security Access code! Make sure to enter the needed security access code when creating the baseline map prior to changes.

Replacement

Component Protection can only be learned/disabled using the Factory Tool in Combination with an online Connection with GeKo access. This can be completed online at the dealer or by using a Pass-Thru (J2534) device per the notes on our Official Factory Repair Information page.