Difference between revisions of "P06A3/001699"
From Ross-Tech Wiki
(Created page with "== P06A3/001699 - Sensor Reference Voltage D: Too Low == ==== Possible Symptoms ==== * Malfunction Indicator Light (MIL) active * Poor engine performance ==== Possible Cau...") |
|||
| Line 19: | Line 19: | ||
* Check sensors and components on the Sensor Reference Voltage "D" Circuit | * Check sensors and components on the Sensor Reference Voltage "D" Circuit | ||
* Check wiring at the ECM with all components removed from the Circuit to verify the reference voltage is present. | * Check wiring at the ECM with all components removed from the Circuit to verify the reference voltage is present. | ||
| + | |||
| + | ==== Special Notes ==== | ||
| + | * See this Ross-Tech forum post, when found in vehicles with the CBEA/CJAA 2.0l CR-TDI engines | ||
| + | ** https://forums.ross-tech.com/index.php?threads/33187/#post-280391 | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 10:38, 5 March 2024
P06A3/001699 - Sensor Reference Voltage D: Too Low
Possible Symptoms
- Malfunction Indicator Light (MIL) active
- Poor engine performance
Possible Causes
- Low ECM voltage to ECM
- Faulty wiring on Sensor Reference Voltage "D" Circuit
- Faulty sensor or component on Sensor Reference Voltage "D" Circuit
- Faulty ECM
Possible Solutions
- Verify ALL Powers and Grounds for the ECM
- Check wiring on Sensor Reference Voltage "D" Circuit
- Check sensors and components on the Sensor Reference Voltage "D" Circuit
- Check wiring at the ECM with all components removed from the Circuit to verify the reference voltage is present.
Special Notes
- See this Ross-Tech forum post, when found in vehicles with the CBEA/CJAA 2.0l CR-TDI engines