Difference between revisions of "P1A58/006744 - NOx catalytic converter: Regeneration required"

From Ross-Tech Wiki
Line 5: Line 5:
  
 
==== Possible Solutions ====
 
==== Possible Solutions ====
* There is a Volkswagen Tech Tip (TT_01-19-07) that maybe helpful when this fault is found in the NAR 2009 - 2014 vehicles with the 2,0l CBEA, CJAA TDI engines. See the link below:
+
* Perform "Regeneration for NOx Storage Catalytic Converter while Driving"
 +
** CJAA engine, use Adaptation Channel [018], follow VCDS instructions after Security Access
 +
* See Volkswagen Tech Tip (TT_01-19-07) for helpful regeneration tips. For the NAR 2009 - 2014 vehicles with the 2,0l CBEA, CJAA TDI engines. See the link below:
 
** https://static.nhtsa.gov/odi/tsbs/2019/MC-10169515-0001.pdf ref: [https://www.nhtsa.gov/ NHTSA.gov]
 
** https://static.nhtsa.gov/odi/tsbs/2019/MC-10169515-0001.pdf ref: [https://www.nhtsa.gov/ NHTSA.gov]
  

Revision as of 15:57, 10 November 2021

P1A58/006744 - NOx catalytic converter: Regeneration required

Possible Causes

Possible Solutions

  • Perform "Regeneration for NOx Storage Catalytic Converter while Driving"
    • CJAA engine, use Adaptation Channel [018], follow VCDS instructions after Security Access
  • See Volkswagen Tech Tip (TT_01-19-07) for helpful regeneration tips. For the NAR 2009 - 2014 vehicles with the 2,0l CBEA, CJAA TDI engines. See the link below:

Special Notes

  • When found in following (see below) North American Audi and Volkswagen diesel vehicles, vehicle maybe part of the "VW Emissions Modification" and maybe covered under an extended warranty program.
    • Audi A3 - 2010 to 2013 (unconfirmed)
    • Volkswagen Golf, Jetta, Beetle - 2009 to 2014
    • Volkswagen Passat - 2015 (unconfirmed)
  • Usually found with the fault code P2BA6/01174 - NOx Exceedance - SCR NOx Catalyst Performance