P246E

From Ross-Tech Wiki
Revision as of 09:54, 22 September 2017 by Dana (talk | contribs) (Created page with "__FORCETOC__ == P246E Exhaust Gas Temperature Sensor 4 Bank 1: Electrical Malfunction == ==== Possible Symptoms ==== * Power Loss/Limp mode * MIL on * Glow Plug Light on * DP...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

P246E Exhaust Gas Temperature Sensor 4 Bank 1: Electrical Malfunction

Possible Symptoms

  • Power Loss/Limp mode
  • MIL on
  • Glow Plug Light on
  • DPF Light on


Possible Causes

  • EGT sensor faulty
  • EGT wiring faulty

Possible Solutions

  • Check EGT sensor and wiring.
  • Note, when found in RoW B8 chassis (8K) models with Engine code CAGA which uses the UDS protocol:
    • The Advanced Measuring Values for EGT sensors may not be labeled correctly. Make sure to check [*ENG106430*] Exhaust gas temperature before particulate filter


TBC.....