Difference between revisions of "Trailer Hitch Retrofitting (7L)"
RtWiKiSyS0p (talk | contribs) |
RtWiKiSyS0p (talk | contribs) m |
||
| Line 1: | Line 1: | ||
| + | '''''Note''': Some sections are marked with 7LA (pre-facelift) and 7L6 (facelift), please decide yourself which one you have.''<br> | ||
| + | |||
__FORCETOC__ | __FORCETOC__ | ||
| − | == CAN-Gateway == | + | == CAN-Gateway (7L6 only) == |
'''[Select]'''<br> | '''[Select]'''<br> | ||
'''[19 - CAN-Gateway]'''<br> | '''[19 - CAN-Gateway]'''<br> | ||
| − | |||
'''[Coding - 07]'''<br> | '''[Coding - 07]'''<br> | ||
'''[Long Coding Helper]'''<br> | '''[Long Coding Helper]'''<br> | ||
Latest revision as of 13:43, 29 June 2007
Note: Some sections are marked with 7LA (pre-facelift) and 7L6 (facelift), please decide yourself which one you have.
CAN-Gateway (7L6 only)
[Select]
[19 - CAN-Gateway]
[Coding - 07]
[Long Coding Helper]
Set Byte 03 Bit 1 = [69] Trailer active.
[Do It!]
[Close Controller, Go Back - 06]
Trailer Control Module
NOTE: This part varies depending on the type of the trailer control module. There are 2 variants available, those which are diagnostic capable and those who are not.
Variant #1: Trailer Control Module (#69) NOT diagnostic capable
Nothing to do here, so leave it alone.
Variant #2: Trailer Control Module (#69) diagnostic capable
This control module requires a coding, see VAG-COM coding help or vehicle specific coding table for details.
Others
If installed the following modules may need to be recoded/adapted.