User:Dana

From Ross-Tech Wiki
Revision as of 17:26, 9 September 2011 by Dana (talk | contribs)

This is my test page please leave it alone ;-)

A0A0A0

  1. C0C0C0

D0D0D0 FFFFFF

  • File:File.png
    alt text
    to use a 200 pixel wide rendition in a box in the left margin with 'alt text' as description
  • Media:File.ogg for directly linking to the file without displaying the file




This chart shows what information is needed to perform each procedure. The requirements and steps differ depending on whether the component you are installing is brand new, or if it has been previously matched to a vehicle. Used keys are ones that have previously been matched to a different vehicle.




space Immo 1 & 2 Immo 3 Immo 4A Immo 4C
Key Matching (New)
Vehicle SKC
Needed
Vehicle SKC
Needed
Vehicle SKC
Needed
Key Matching (Used)
Vehicle SKC
Needed
Not Possible Not Possible Not Possible
ECU Swapping (New)
No SKC needed
see note
Vehicle SKC Needed Vehicle SKC Needed -
ECU Swapping (Used) No SKC needed
see note
- - -
Cluster Swapping (New) - - - -
Cluster Swapping (Used) - - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -



This is
a table


An example table
First header Second header
upper left   right side
lower left lower middle
A table in a table
[[1]] File:Wiki.png

Two Wikimedia logos


http://meta.wikimedia.org/wiki/Help:Table




0xxxxxxx 0 1 0 1 0 1 0 1
x0xxxxxx 0 1 0 1 0 1 0 1
xx0xxxxx 0 1 0 1 0 1 0 1
xxx0xxxx 0 1 0 1 0 1 0 1
xxxx0xxx 0 1 0 1 0 1 0 1
xxxxx0xx 0 1 0 1 0 1 0 1
xxxxxx0x 0 1 0 1 0 1 0 1
xxxxxxx0 0 1 0 1 0 1 0 1

Measuring Block Group 066
Field 2 Data
0xxxxxxx 0 1 0 1 0 1 0 1 0 = 1 =
x0xxxxxx - 0 = 1 =
xx0xxxxx 0 = 1 =
xxx0xxxx 0 = 1 =
xxxx0xxx 0 = 1 =
xxxxx0xx 0 = 1 =
xxxxxx0x 0 = 1 =
xxxxxxx0 0 = Normal CCS 1 = Accel. pedal
overide


Measuring Block Group 066
Field 4 Data
0xxxxxxx 0 1 0 1 0 1 0 1
x0xxxxxx
xx0xxxxx
xxx0xxxx
xxxx0xxx
xxxxx0xx 0 = 1 =
xxxxxx0x 0 = 1 =
xxxxxxx0 0 = Normal CCS 1 = Accel. pedal
overide


0 1 0 1 1 1 0 1 0 = Brake Not Depressed 1 = Brake depressed (brake light switch)
0 = Brake Not Depressed 1 = Brake depressed (brake pedal switch)
0 = Clutch Not Depressed 1 = Clutch Depressed (always 1 in Auto. Trans.)
0 = CCS Not active in ECM 1 = CCS active in ECM
N/A N/A
N/A N/A
0 = Accel. pedal overide 1 = CCS Operating
0 = Normal CCS 1 = Accel. pedal overide




Reading Roof Electronics Switch Conditions, Electric Power Top

Measuring Block Group 001
Field 2 X Field 3 Data
1 1 0 1 1 0 1 0 1 0 X 0 1 1 0 F201
F290
F293
F200
X
Not used, always "0"
F292
X
F171
F202
F294
F295
F172
Switch Point for Bow UP
Switch Point for Bow OPEN
Switch Point for Bow DEAD CENTER